0460152407 Datasheet, PDF (9/13 Pages) Molex Electronics Ltd. – PRODUCT SPECIFICATION FOR Mini-Fit Plus HCS™

PRODUCT SPECIFICATION
6.2 MECHANICAL REQUIREMENTS (CON’D)
ITEM
12
TEST
Header Solid Pin
Retention Force
in Housing
TEST PROCEDURE
Axial pullout force on the terminal in the
housing at a rate of 25 ± 6 mm (1 ± ¼ inch)
per minute.
REQUIREMENT
Tin
4.45 N (1.00 lbf)
MINIMUM
Gold
4.45 N (1.00 lbf)
MINIMUM
Header Stamped Pin Axial pullout force on terminal from housing
13 Retention Force at a rate of 25 ± 6 mm (1 ± ¼ inch) per
in Housing
minute.
30 N (6.74 lbf)
MINIMUM retention force
14
PCB Peg
Engagement and
Separation Forces
Engage and separate a connector at a rate
of 25 ± 6 mm (1 ± ¼ inch) per minute.
(Applies to parts with PCB retention
features only)
98.0 N (22.0 lbf)
MAX. insertion force;
10.0 N (2.24 lbf)
MIN. withdrawal force
6.3 ENVIRONMENTAL REQUIREMENTS
ITEM
TEST
TEST PROCEDURE
REQUIREMENT
1a
Temperature Life
Group 1
Per EIA-364-17, method A: mate
connectors and expose to 240 hours at 105
± 2°C.
10 mΩ Max. chg. from Initial;
Visual: No Damage
1b
Temperature Life
(preconditioning)
Groups 3 & 5
Per EIA-364-17, method A: mate
connectors and expose to 120 hours at 105
± 2°C.
10 mΩ Max. chg. from Initial;
Visual: No Damage
1c
Temperature Life
(preconditioning)
Group 4
Per EIA-364-17, method A: mate
connectors and expose to 300 hours at 105
± 2°C.
10 mΩ Max. chg. from Initial;
Visual: No Damage
2
Thermal
Shock
Per EIA-364-32, method A, test condition I,
test duration A-4: mate connectors and
expose for 10 cycles between –55°C and
105° C; dwell 0.5 hours at each
temperature.
10 mΩ Max. chg. from Initial;
Visual: No Damage
Dielectric Strength per 5.1.3
Insulation Resistance per 5.1.2
Per EIA-364-31, method III w/o
conditioning, initial measurements, cold
3
Cyclic Temperature
& Humidity
shock and vibration. Cycle mated
connectors between 25°C ±3°C @ 80%
±3% RH and 65°C ±3°C @ 50% ±3RH.
Ramp time: 0.5 hr.; dwell time: 1 hr.
Perform 24 cycles.
10 mΩ Max. chg. from Initial;
Visual: No Damage
REVISION:
C1
ECR/ECN INFORMATION: TITLE:
EC No: UCP2011-0141
DATE: 2010 /07/15
PRODUCT SPECIFICATION FOR
MINI-FIT PLUS HCS
CONNECTOR SYSTEM
SHEET No.
9 of 13
DOCUMENT NUMBER:
CREATED / REVISED BY:
CHECKED BY:
APPROVED BY:
PS-45750-001
BWIRKUS
BWIRKUS
APATEL
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.1).DOC