0483380056 Datasheet, PDF (4/8 Pages) Molex Electronics Ltd. – 0.8mm PITCH MINI PCI EXPRESS CONNECTOR

PRODUCT SPECIFICATION
5.0 PERFORMA CE
5.1 TEST REQUIREME TS A D PROCEDURES SUMMARY
ITEM DESCRIPTIO
TEST CO DITIO
1 Examination of Product
Visual inspection
REQUIREME T
Meets requirements of product
drawing. No physical damage.
5.2 ELECTRICAL REQUIREME TS
ITEM DESCRIPTIO
TEST CO DITIO
REQUIREME T
2
Contact Resistance
(Low Level)
Mate connectors, measure by dry circuit,
20mV Max., 100mA Max.
55 milliohms Max. (initial)
After test : ∆R:20 milliohm Max.
EIA-364-23
Mate connectors, apply 500 V DC
3 Insulation Resistance between adjacent terminal or ground.
EIA-364-21
500 Megohm min.
4
Dielectric
Withstanding
Voltage
Mate connectors; apply 300V AC for 1
minute between adjacent terminal or
ground.
EIA-364-20
No breakdown;
Current leakage:1 mA MAX.
Mate connectors and measure the
temperature rise of contact when the
5 Temperature Rise Maximum AC rated current 0.5A is
passed.
EIA-364-70
Temperature Rise: 30°C Max.
1dB Max. Up to 1.25 GHz;
A common test fixture for connector _{≦[1.6*(F-1.25)+1] dB for}
6
Insertion Loss
characterization shall be used. This is
differential insertion loss requirement.
EIA-364-101
1.25 GHz<F≦3.75 GHz
(For example, ≦5 dB at
F=3.75 GHz)
A common test fixture for connector ^{≦12dB up to 1.3 GHz;}
7
Return Loss
characterization shall be used. This is ^{≦-7dB up to 2 GHz;}
differential insertion loss requirement. ≦-4dB up to 3.75 GHz;
EIA-364-108
-32dB up to 1.25 GHz;
A common test fixture for connector _{≦-[32-2.4*(F-1.25)] dB for}
8
Next Cross-talk
characterization shall be used. This is
differential cross-talk requirement.
EIA-364-90
1.25 GHz<F≦3.75 GHz
(For example, ≦-26 dB at
3.75 GHz)
5.3 MECHA ICAL REQUIREME TS
ITEM DESCRIPTIO
TEST CO DITIO
REQUIREME T
REVISION: ECR/ECN INFORMATION: TITLE:
B1
EC No: S2011-0490
DATE: 2010 /11/30
0.8mm PITCH MINI PCI
EXPRESS CONNECTOR
SHEET No.
4 of 8
DOCUMENT NUMBER:
PS-48338-002
CREATED / REVISED BY:
JESSIECHUA 2010/11/30
CHECKED BY:
KSSHANTHA 2010/11/30
APPROVED BY:
NAGESHKN 2010/12/03
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC