|
90327-0304 Datasheet, PDF (10/20 Pages) Molex Electronics Ltd. – 1.27mm IDT Connector System for Ribbon Cable Applications | |||
|
◁ |
1.27mm (.050") Pitch
Picoflex® PF-50
Latched Header
90816
SMT
Latches
Features and Benefits
⢠Positive latch for increased retention
⢠Polarizing side posts and PCB pegs
⢠Stamped SMT contacts with in-line, flat blades
⢠2 points of contact with female terminal
⢠Rigid, staggered SMT solder tails
⢠Can be used in RMS lead-free process up to 260Ë
Reference Information
Product Specification: PS-99020-0011
Packaging: Tube or blister pack (contact Molex)
Mates With: 90327
Designed In: Millimeters
Electrical
Voltage: 250V
Current: 1.2A
Contact Resistance: 15 milliohms max.
Dielectric Withstanding Voltage: 750V rms
Insulation Resistance: 1000 Megohms min.
Mechanical
Contact Retention to Housing: 7N
Mating Force: Tinâ1.7N; Goldâ1.1N
Unmating Force: Tinâ0.25N; Goldâ0.25N
Unmating Force 90327 Header: 0.25N
Durability: T inâ5 cycles max. (using extraction tool)
Goldâ5 cycles max. (using extraction tool)
Physical
Housing: Black Polyphthalamide 30% glass-filled
Contact: Brass
Plating: See Table
Circuits
4
6
8
10
12
14
16
18
20
22
24
26
Tin 3-5µm (120-200µ")
90816-0X04
90816-0X06
90816-0X08
90816-0X10
90816-0X12
90816-0X14
90816-0X16
90816-0X18
90816-0X20
90816-0X22
90816-0X24
90816-0X26
Tube Pack
Select Gold 0.76µm (30µ")
90816-3X04
90816-3X06
90816-3X08
90816-3X10
90816-3X12
90816-3X14
90816-3X16
90816-3X18
90816-3X20
90816-3X22
90816-3X24
90816-3X26
Order No.
Blister Pack
Tin 3-5µm (120-200µ")
Select Gold 0.76µm (30µ")
90816-0X06
90816-0X08
90816-0X10
90816-0X12
90816-0X14
90816-0X16
90816-0X18
90816-0X20
90816-0X22
90816-0X24
90816-0X26
90816-3X06
90816-3X08
90816-3X10
90816-3X12
90816-3X14
90816-3X16
90816-3X18
90816-3X20
90816-3X22
90816-3X24
90816-3X26
Replace X with the combination of PEC peg option and polarizing side post height:
PCB Pegs
0
Yes
3
No
PCB Pegs
2
Yes
4
No
1.27mm (.050") Pitch
Picoflex® PF-50
Connector
91577
Low Profile, IDT
Board-In, Opposite Pin Layout
Features and Benefits
⢠For permanent wire-to-board connections
⢠Kinked solder tails for board retention during solder
process
⢠Fits same board layout pattern as male header
⢠Height from board when soldered and terminated only
6.40mm (.252")
⢠2 points of contact in IDT section
⢠Accepts 26 to 28 AWG, 7 strands, ribbon cable
⢠Opposite pin layout vs. 90584
Reference Information
Product Specification: PS-99020-0011
Packaging: Tube (2 options)
Tooling Information: See end of section
Designed In: Millimeters
Electrical
Voltage: 250V
Current: 1.2A
Contact Resistance: 15 milliohms max.
Dielectric Withstanding Voltage: 750V
Insulation Resistance: 1000 Megohms min.
Physical
Housing: White polyester, UL 94V-0
Contact: Phosphor Bronze Alloy
Plating: 2 -4µm (80-160µ") Tin over Nickel
PCB Thickness: 1.60mm ± 0.20
Circuits
4
6
8
10
12
14
Individual Tube
91577-1304
91577-1306
91577-1308
91577-1310
91577-1312
91577-1314
Order No.
Stacked Tube
91577-2304
91577-2306
91577-2308
91577-2310
91577-2312
91577-2314
Circuits
16
18
20
22
24
26
10
Individual Tube
91577-1316
91577-1318
91577-1320
91577-1322
91577-1324
91577-1326
Order No.
Stacked Tube
91577-2316
91577-2318
91577-2320
91577-2322
91577-2324
91577-2326
|
▷ |