CPT-00053 Datasheet, PDF (1/1 Pages) Molex Electronics Ltd. – PowerCat C6A Consolidation Point/ MUTO Enclosure

FEATURES AND SPECIFICATIONS
Features and Benefits
Consolidation Points or Multi-User
Telecommunications Outlets (MUTO) are
intended to provide increased flexibility
and economy for installations where open
office spaces require frequent
reconfiguration.
Consolidation Points are intended for
interconnection between horizontal
cables extending from building pathways
and horizontal cables extending into
furniture pathways. Consolidation Point
enclosures are frequently required to be
installed in ceiling voids or raised floors.
The advantage of a MUTO is that it
provides a completely modular solution
for work area changes. It provides
customers with easy access for work
area changes. MUTOA ‘s should not be
installed in ceiling spaces or raised floors
to allow easy access and modularity.
Note: Copper work area cables
connected to a MUTO shall meet the
requirements of TIA/EIA 568 B-3 and ISO
11801:2002.
Molex Premise Networks Consolidation
Point/MUTO Enclosure features 8
shuttered PowerCat 6A modules housed
in a rugged steel enclosure, which
protects incoming cable , but allows
ready access to the Telecommunications
Outlet links. Two enclosures may be
interconnected allowing for expansion.
The PowerCat 6A Shielded DataGate Jack
was specifically designed for high-speed
data transmission. Offering superior al-
ien cross-talk suppression and enhanced
EMI protection. The connector provides a
spring loaded shutter that protects from
dust and contaminants but the spring
loaded design also ejects improperly
seated patch cords.
Molex recommends the full range of
PowerCat 6A shielded products are used
in a system to maximise cabling
performance
n Allows moves, adds and changes
(MACs) without re-terminating
n 8 Port capacity
n Includes protected labelling facilities
n Rugged enclosure
n Factory assembled
n C6A Shielded DataGate Modules
included
n RoHS Compliant
Technical Information
Mechanical Characteristics
Enclosure
Material:
CRS Cold Rolled

Steel
Thickness:
1.52mm (0.060”)
Coating:
Black Powercoat
PowerCat 6A Jack
IDC Connector
Plastic Housing: Polycarbonate,
UL94V-0 rated
Operating Life: Minimum 20

insertion cycles
Contact Material: Copper Alloy
IDC Contact Plating: Tin Matte finish
Contact Force: 100g minimum
Wire Accommodation: 22-24 AWG solid
Jack Connector
Housing:
Zinc Alloy plated

Bright Ni/Cu
Operating Life: Minimum 750

insertion cycles
Contact Material: Copper Alloy
Contact Plating: 1.25 micrometres
Au/Ni
Contact Force: 100g minimum
Plug Retention Force: 6.8kg minimum
Electrical/Optical Characteristics
Interface Resistance: 20mΩ
Initial Contact Resistance: 2.5mΩ
Insulation Resistance: >100MΩ
Termination Tool: 110 Style
Shipping weight: 1.475kg
Dimensions:
258mm (10”) (L) x 120 (4.72”) (D)x
85mm (3.35”)
PowerCat C6A
Consolidation Point/
MUTO Enclosure
ORDERING INFORMATION
Order No.
CPT-00053
SAP No.
Description
Consult Molex Consolidation Point /MUTO Enclosure 8 Port C6A
Americas
Tel: [phone]
www.molexpn.com
MOLEX PREMISE NETWORKS
EMEA
Tel: [phone]
www.molexpn.co.uk
APAC
Tel: [phone]
www.molexpn.com.au
©2012, Molex Premise Networks Printed in the UK Form#CPT-00053 Page 1
This information is correct at the time of publication, specifications are subject to change
Issue 1