English
Language : 

63824-4600 Datasheet, PDF (1/3 Pages) Molex Electronics Ltd. – The 63824-4600 Extraction Tool is designed to remove crimp terminals from Nano-Fit power connectors See below.
Extractor Tool for Crimp Terminals
Extractor Tool
Application Tooling
Specification Sheet
Order No. 63824-4600
FEATURES
 The 63824-4600 Extraction Tool is designed to remove crimp terminals from Nano-Fit™ power connectors.
See below.
SCOPE
Products: Nano-Fit™ Power Connectors and Crimp Terminals 20-26 AWG.
Terminal Terminal Housing
Series No. Order No. Series No.
Housing Order No.
105307-1102 105307-1103 105307-1104 105307-1105 105307-1106
105307 105307-1107 105307-1108 105307-2101 105307-2103 105307-2104
105307-2105 105307-2106 105307-2107 105307-2108
105300-1100
105300
20-26 AWG
Nano-Fit™
105300-1200
105300-1300
105300-2100
105300-2200
105300-2300
105308
105307
105308-1102 105308-1103 105308-1104 105308-1105 105308-1106
105308-1107 105308-1108 105308-2101 105308-2103 105308-2104
105308-2105 105308-2106 105308-2107 105308-2108
With TPA Feature
105307-1202 105307-1203 105307-1204 105307-1205 105307-1206
105307-1207 105307-1208 105307-2202 105307-2203 105307-2204
105307-2205 105307-2206 105307-2207 105307-2208
105308-1202 105308-1203 105308-1204 105308-1205 105308-1206
105308 105308-1207 105308-1208 105308-2202 105308-2203 105308-2204
105308-2205 105308-2206 105308-2207 105308-2208
DESCRIPTION:
This extractor tool is 57.3 mm (2.26 in.) long by 6.35mm (.25 in.)
diameter, and weight about 0.03kg (1 oz.). See Figure 1.
44.5mm
TPA Latch
1.75”
Before terminals can be extracted the TPA latch must be
opened first on Nano-Fit™ power connectors that have the TPA
57.3mm
2.26”
feature see chart above.
1. Using a small screwdriver insert the flat edge under the tab
Figure 1
of the TPA lock. See Figure 2.
2. Pull up and push out towards the crimped wire.
3. Repeat this on the opposite side of the TPA lock. The TPA lock should be removed completely from
the power connector.
12.7mm
0.50”
Order No: ATS-638244600 Release Date: 06-18-15
Revision: A
Revision Date: 06-18-15
UNCONTROLLED COPY
Page 1 of 3