0638250575 Datasheet, PDF (1/7 Pages) Molex Electronics Ltd. – Application Tooling Specification Sheet

Hand Crimp Tool for Commoning Crimp Terminals
HAND CRIMP
TOOL
Application Tooling
Specification Sheet
TYPE 4D
Order No. 63825-0500
FEATURES
A full cycle ratcheting hand tool ensures complete crimps
Ergonomic soft grip handles for comfortable crimping
A precision user-friendly terminal locator wire stop holds terminals in the proper crimping position
Right and Left handed applications
This tool is WHMA-IPCA620 Class 2 compliant as indicated
This tool is RoHS compliant, however RoHS compliant is not required
SCOPE
Products: Commoning Terminals, 28-30 AWG.
Terminal
Series No.
1457-6
%
Terminal Order No.
Wire Size % Insulation Diameter
Strip Length
Loose Piece + Reel AWG mm²
mm
In.
mm
In.
05-02-0092 05-02-0091 28-30 0.09-.055 0.90-0.80 .035-.031 3.96-5.54
.156-.218
+ Customer to cut off terminal from reel: 0.18mm (.007”) maximum Cut-off Tab.
To Achieve IPC-A-620 Class 2 Crimps, the following wire insulation diameter limits are recommended:
1. 28 AWG 0.89mm (.035 inch) UL1061.
2. 30 AWG 0.81mm (.032 inch) UL1061.
For Crimping 24-26 AWG Wire- Use 63823-1200 Hand Crimp Tool.
DEFINITION OF TERMS
BELL MOUTH
BRUSH
INSULATION
CRIMP
SEAM
BEND UP
ROLLING
STRIP
LENGTH
CUT-OFF TAB
TWISTING
BEND
DOWN
CONDUCTOR
CRIMP
CONDUCTOR
CRIMP HEIGHT
Doc No: ATS-638250500
Revision: A
Release Date: 02-14-11
Revision Date: 02-14-11
UNCONTROLLED COPY
Page 1 of 7