0638240100 Datasheet, PDF (1/2 Pages) Molex Electronics Ltd. – Application Tooling Specification Sheet

Extractor Tool for CMX Receptacle Connector
Extractor Tool
Application Tooling
Specification Sheet
Order No. 63824-0100
FEATURES
This Extractor Tool is for opening the Secondary Lock from CMX Receptacle 53 Way, 198009 Series.
This Tool will also assist in closing the secondary lock.
SCOPE
Products: CMX Receptacle Connector Assembly, 53 Way, Right and Left Slide Orientation.
Housing Series No
Housing Order No.
198009
198009-1001 198009-1002 198009-1003 198009-1004
198009-2001 198009-2002 198009-2003 198009-2004
OPERATION:
Opening the (TPA) Secondary Lock
On a CMX receptacle assembly follow the steps below:
1. Insert the extractor tool into the (2) side slots of the (TPA) secondary lock on each sides until it stops. See
Figure 1.
2. While keeping the extractor tool in this position pull down on the sides of the (TPA) secondary lock without
touching the latches. The locking latches should be visible. See Figure 2.
3. Remove the extractor tool and check the position of the TPA.
TPA SECONDARY
LOCK CLOSED
TPA SECONDARY
LOCK OPEN
SLOTS
TPA SECONDARY
LOCKING LATCHES
(BOTH SIDES)
EXTRACTOR
TOOL
SLOTS
Figure 1
EXTRACTOR TOOL
LOCKING
LATCHES OPEN
(BOTH SIDES)
Figure 2
Doc No: ATS-638240100 Release Date: 07-14-10
Revision: E
Revision Date: 06-06-12
UNCONTROLLED COPY
Page 1 of 2