0638238375 Datasheet, PDF (1/6 Pages) Molex Electronics Ltd. – Application Tooling Specification Sheet

Hand Crimp Tool for 6.35mm (.250”) Tab Slip-on Male Crimp Terminals
Modular Crimp Head
Order No. 63823-8370
Application Tooling
Specification Sheet
TYPE 4A
Hand Crimp Tool
Order No. 63823-8300
FEATURES
% A full cycle ratcheting hand tool ensures complete crimps
% Ergonomically designed soft handles
% Precisely designed crimping profiles with simple contact positioning
% Easy handling due to outstanding force ratio
% Modular Crimp Head is removable and can be use in the Air Powered Tool Order No.63816-0100,
accompanied by Air Powered Crimp Adapter (Order No. 63816-0700).
% Can also be used in the Battery Powered Tool Order No. 63816-0200 (110 V) or 63816-0250 (220 V)
accompanied by Battery Powered Crimp Adapter (Order No. 63816-0600).
SCOPE
Products: 6.35mm (.250”) Tab Slip-on Male Crimp Terminals, 20-22 AWG, 0.30-0.50mm² wires.
Terminal Series No.
Terminal
Order No.
Wire Size and Type
AWG mm²
Type
Insulation Diameter Strip Length
mm
In.
mm
In.
35725
35725-3000
35725-3010
20
22
-
- UL1015, UL1007 1.70-2.60
- UL1015, UL1007 1.50-2.50
0.50 AVS, AVSS 1.60-2.10
.067-.102
.059-.098
.063-.083
4.80-5.20 .189-.205
- 0.30 AVS, AVSS 1.40-1.90 .055-.075
Insulation crimp to meet IPC/WHMA-A-620 Class 2 compliance.
Terminal will accommodate the UL1015, UL1007 and AVS, AVSS wires.
Customer to cut off terminal from reel: 0.50mm (.020”) maximum Cut-off Tab.
Doc No: ATS-6382383HM Release Date: 10-15-10
Revision: A
Revision Date: 10-15-10
UNCONTROLLED COPY
Page 1 of 6