0638238275 Datasheet, PDF (1/6 Pages) Molex Electronics Ltd. – Application Tooling Specification Sheet

Hand Crimp Tool for Slip-on Female Crimp Terminals
Modular Crimp Head
Order No. 63823-8270
Application Tooling
Specification Sheet
TYPE 4A
Hand Crimp Tool
Order No. 63823-8200
FEATURES
% A full cycle ratcheting hand tool ensures complete crimps
% Ergonomically designed soft handles
% Precisely designed crimping profiles with simple contact positioning
% Easy handling due to outstanding force ratio
% Modular Crimp Head is removable and can be use in the Air Powered Tool Order No.63816-0100,
accompanied by Air Powered Crimp Adapter (Order No. 63816-0700).
% Can also be used in the Battery Powered Tool Order No. 63816-0200 (110 V) or 63816-0250 (220 V)
accompanied by Battery Powered Crimp Adapter (Order No. 63816-0600).
SCOPE
Products: Slip-on Female Crimp Terminals, 20-22 AWG, 0.30-0.50mm² wires.
Terminal Series No.
Terminal
Order No.
Wire Size and Type
AWG mm²
Type
Insulation Diameter Strip Length
mm
In.
mm
In.
20 - UL1015, UL1007 1.70-2.60 .067-.102
35430
35430-1700
22
-
- UL1015, UL1007 1.50-2.50
0.50 AVS, AVSS 1.60-2.10
.059-.098
.063-.083
5.00-5.40 .197-.213
- 0.30 AVS, AVSS 1.40-1.90 .055-.075
Insulation crimp to meet IPC/WHMA-A-620 Class 2 compliance.
Terminal will accommodate the UL1015, UL1007 and AVS, AVSS wires.
Customer to cut off terminal from reel: 0.50mm (.020”) maximum Cut-off Tab.
DEFINITION OF TERMS
STRIP LENGTH
BRUSH
BELL MOUTH
SEAM
WIRE
CONDUCTOR
CRIMP HEIGHT
CUT-OFF
TAB
ROLLING
BEND
UP
TWIST
BEND DOWN
INSULATION
CRIMP
▲SEE NOTE
Doc No: ATS-6382382HM Release Date: 10-19-10
Revision: A
Revision Date: 10-19-10
UNCONTROLLED COPY
Page 1 of 6