0638238075 Datasheet, PDF (1/6 Pages) Molex Electronics Ltd. – Application Tooling Specification Sheet

Hand Crimp Tool for 2.5mm (.098") Pitch Wire to Wire Crimp Terminals
Modular Crimp Head
Order No. 63823-8070
Application Tooling
Specification Sheet
TYPE 4A
Hand Crimp Tool
Order No. 63823-8000
FEATURES
% A full cycle ratcheting hand tool ensures complete crimps
% Ergonomically designed soft handles
% Precisely designed crimping profiles with simple contact positioning
% Easy handling due to outstanding force ratio
% A-620 Class 3 compliant and RoHS compliant
% Modular Crimp Head is removable and can be use in the Air Powered Tool Order No.63816-0100,
accompanied by Air Powered Crimp Adapter (Order No. 63816-0700).
% Can also be used in the Battery Powered Tool Order No.63816-0200 (110 V) or 63816-0250 (220 V),
accompanied by Battery Powered Crimp Adapter (Order No. 63816-0600).
SCOPE
Products: 2.5mm (.098") Pitch Wire to Wire Terminal, 22-28 AWG.
Terminal
Series No.
50397
Terminal Order No. Wire Size
Reel
AWG mm²
Insulation Diameter Strip Length
mm
In.
mm
In.
50397-8000 22-28 0.35-0.08 1.05-1.90 0.043-.075 2.6-3.1 0.102-0.122
Follow the Cut-Off Tab specifications on Applicator specification sheets.
See Conditions on page 2.
DEFINITION OF TERMS
BEND UP
STRIP
LENGTH
CONDUCTOR
CRIMP
SEAM
ROLLING
BEND
DOWN
TWISTING
BRUSH
INSULATION CRIMP
▲SEE NOTE
CRIMP HEIGHT
The above terminal drawing is a generic terminal representation. It is not an image of a terminal listed in the scope.
Doc No: ATS-6382380HM Release Date: 02-15-11
Revision: A
Revision Date: 02-15-11
UNCONTROLLED COPY
Page 1 of 6