0638237975 Datasheet, PDF (1/7 Pages) Molex Electronics Ltd. – Application Tooling Specification Sheet

Hand Crimp Tool for 2.50mm Board-In Crimp Terminals
Modular Crimp Head
Order No. 63823-7970
Application Tooling
Specification Sheet
TYPE 4A
Hand Crimp Tool
Order No. 63823-7900
FEATURES
% A full cycle ratcheting hand tool ensures complete crimps
% Ergonomically designed soft handles
% Precisely designed crimping profiles with simple contact positioning
% Easy handling due to outstanding force ratio
% Modular Crimp Head is removable and can be use in the Air Powered Tool Order No.63816-0100,
accompanied by Air Powered Crimp Adapter (Order No. 63816-0700).
% Can also be used in the Battery Powered Tool Order No.63816-0200 (110 V) or 63816-0250 (220 V),
accompanied by Battery Powered Crimp Adapter (Order No. 63816-0600).
SCOPE
Products: 2.50mm (.098") Board-In Crimp Terminal, 22-28 AWG, UL1007 and UL1569 wires.
Terminal
Series No.
35047
Terminal Order No.
Reel
Wire Size
AWG mm²
Insulation Diameter Strip Length
mm
In.
mm
In.
35047-9800
35047-9810
35047-9802
22-28
0.33-0.08
1.15-1.90
.045-.075 2.40-2.90 .094-.114
Insulation crimp to meet IPC/WHMA-A-620 Class 2 compliance.
Note: Terminal will accommodate the UL1007 and UL1569 wires.
Customer to cut off terminal from reel: 0.30mm (.012”) maximum Cut-off Tab.
DEFINITION OF TERMS
BRUSH
INSULATION
CRIMP
▲SEE NOTE
BELL MOUTH
SEAM
BEND UP
ROLLING
STRIP
LENGTH
BEND
DOWN
TWISTING
CUT-OFF TAB
CONDUCTOR
CRIMP COND.CRIMP
HEIGHT
The above terminal drawing is a generic terminal representation. It is not an image of a terminal listed in the
scope.
Doc No: ATS-6382379HM Release Date: 09-02-10
Revision: B
Revision Date: 10-14-10
UNCONTROLLED COPY
Page 1 of 7