0638237575 Datasheet, PDF (1/7 Pages) Molex Electronics Ltd. – Application Tooling Specification Sheet

Hand Crimp Tool for 2.50mm (.098”) Wire-to-Board Crimp Terminals
Modular Crimp Head
Order No. 63823-7570
Application Tooling
Specification Sheet
TYPE 4A
Hand Crimp Tool
Order No. 63823-7500
FEATURES
% A full cycle ratcheting hand tool ensures complete crimps
% Ergonomically designed soft handles
% Precisely designed crimping profiles with simple contact positioning
% Easy handling due to outstanding force ratio
% A-620 Class 3 compliant and RoHS compliant
% Modular Crimp Head is removable and can be use in the Air Powered Tool Order No.63816-0100,
accompanied by Air Powered Crimp Adapter (Order No. 63816-0700).
% Can also be used in the Battery Powered Tool Order No.63816-0200 (110 V) or 63816-0250 (220 V),
accompanied by Battery Powered Crimp Adapter (Order No. 63816-0600).
SCOPE
Products: 2.50mm (.098”) Wire-to-Board Crimp Terminals, 22-28 AWG.
Terminal
Series No.
Terminal
Order No.
●Reel
Wire Size
AWG mm²
Insulation Diameter
mm
In.
Strip Length
mm
In.
50752 50752-8000 50752-8100 22-28 0.35-0.08 1.15-1.80 .045-.071 2.00-2.50 .078-.098
● Customer to cut off terminal from reel: 0.20mm (.008”) maximum Cut-off Tab.
See Conditions on page 2.
DEFINITION OF TERMS
BRUSH
INSULATION
CRIMP
▲SEE NOTE
BELL MOUTH
SEAM
BEND UP
ROLLING
STRIP
LENGTH
BEND
DOWN
TWISTING
CUT-OFF TAB
CONDUCTOR
CRIMP COND.CRIMP
HEIGHT
The above terminal drawing is a generic terminal representation. It is not an image of a terminal listed in the
scope.
Doc No: ATS-6382375HM Release Date: 09-27-10
Revision: B
Revision Date: 10-14-10
UNCONTROLLED COPY
Page 1 of 7