0638236875 Datasheet, PDF (1/7 Pages) Molex Electronics Ltd. – Application Tooling Specification Sheet

Hand Crimp Tool For 2.50mm (.098") Board-In Connector, Mini. Crimp Pin
HAND CRIMP
TOOL
Application Tooling
Specification Sheet
TYPE 4D
Order No. 63823-6800
FEATURES
A full cycle ratcheting hand tool ensures complete crimps
Ergonomic soft grip handles for comfortable crimping
A precision user-friendly terminal locator wire stop holds terminals in the proper crimping position
Right and Left handed applications
This tool is IPC/WHMA A-620 Class 2 compliant
This tool is RoHS compliant, however RoHS compliant is not required
SCOPE
Products: 2.5 (.098”) Board-In Connector, Mini Crimp Pin, 22-28 AWG.
Terminal Terminal Order No.
Series No. _{Loose Piece}
Reel
Wire Size
AWG mm²
Insulation Diameter
IPC/WHMA-A620
Terminal
mm
In.
mm
In.
Strip Length
mm
In.
5394 08-70-1044 08-70-1043 22-28 .35-.08 1.20-1.50 .047-.059 1.20-1.70 .047-.067 2.10-2.70 .083-.106
Customer to cut off terminal from reel: 0.30mm (.012”) maximum Cut-off Tab.
To achieve optimum IPC-A620 Class 2 insulation crimps, use this insulation OD range.
Overall insulation OD specification for terminal.
DEFINITION OF TERMS
BRUSH
BELL MOUTH
CONDUCTOR
CRIMP
INSULATION
CRIMP
BEND UP
ROLLING
STRIP
LENGTH
TWISTING
BEND
DOWN
CRIMP HEIGHT
The above terminal drawing is a generic terminal representation. It is not an image of a terminal listed in the
scope.
Doc No: ATS-638236800 Release Date: 10-25-10
Revision: A
Revision Date: 10-25-10
UNCONTROLLED COPY
Page 1 of 7