0638235975 Datasheet, PDF (1/7 Pages) Molex Electronics Ltd. – Application Tooling Specification Sheet

Hand Crimp Tool for MV-396™ Wire-to-Board Crimp Terminals
HAND CRIMP
TOOL
Application Tooling
Specification Sheet
TYPE 4D
Order No. 63823-5900
FEATURES
A full cycle ratcheting hand tool ensures complete crimps
Ergonomic soft grip handles for comfortable crimping
A precision user-friendly terminal locator wire stop holds terminals in the proper crimping position
Right and Left handed applications
This tool is IPC/WHMA A-620 Class 2 compliant as indicated
This tool is RoHS compliant, however RoHS compliant is not required
SCOPE
Products: MV-396™ 3.96 (.156”) Pitch Wire-to-Board Crimp Terminals, 18-20 AWG.
Terminal
Series No.
35922
Terminal Order No.
Wire Size
Insulation Diameter
Maximum
Strip Length
Reel
AWG mm² mm
In.
mm
In.
35922-8011 35922-9002 18-20 0.80-0.50 3.00 .118x 3.00-3.50 .118-.138
Customer to cut off terminal from reel: 0.20mm (.008”) maximum Cut-off Tab.
DEFINITION OF TERMS
BRUSH
BELL MOUTH
STRIP LENGTH
INSULATION CRIMP
▲SEE NOTE
BEND UP
SEAM
WIRE
CONDUCTOR ^CUT-OFF
CRIMP HEIGHT ^TAB
ROLLING
TWISTING
BEND
DOWN
Doc No: ATS-638235900 Release Date: 08-26-10
Revision: C
Revision Date: 08-24-12
UNCONTROLLED COPY
Page 1 of 7