0638235575 Datasheet, PDF (1/9 Pages) Molex Electronics Ltd. – Application Tooling Specification Sheet

Tool Kit for 250 MP-Lock Terminal
Tool Kit
Order No. 63823-5570
Application Tooling
Specification Sheet
TYPE 4C
Hand Crimp Tool
Order No. 63823-5500
FEATURES
% A full cycle ratcheting hand tool ensures complete crimps
% Ergonomically designed soft handles
% Precisely designed crimping profiles with simple contact positioning
% Easy handling due to outstanding force ratio
Tool kits are easily installed into the Hand Crimp Tool or the 63816-0300 Power Crimp Head which is installed
into the 63816-0200 (110 V) or the 63816-0250 (220 V) Battery Powered Tool.
Many different Tool kits can be used with a single Battery Powered Tool.
This tool is IPC/WHMA-A-620 Class 2 and RoHS compliant.
SCOPE
Products: .250 MP-Lock Terminals for 14-18 AWG Wire.
Terminal Series No.
Terminal Order No.
Reel Form Only
Wire Size
AWG mm²
Insulation Diameter
mm
In.
Strip Length
mm
In.
14 2.00
57989
57989-9810
16 1.30 2.2-3.4 .087-.134 5.00-5.50 .197-.217
18 0.80
Customer to cut off terminal from reel: 0.50mm (.020”) maximum Cut-off Tab.
DEFINITION OF TERMS
BELL MOUTH
BRUSH
INSULATION
CRIMP
▲SEE NOTE
STRIP
LENGTH
WIRE
CUT-OFF
TAB
SEAM
CONDUCTOR
CRIMP HEIGHT
The above terminal drawing is a generic terminal representation. It is not an image of a terminal listed in the
scope.
Doc No: ATS-6382355HM Release Date: 03-09-11
Revision: A
Revision Date: 03-09-11
UNCONTROLLED COPY
Page 1 of 9