0638235275 Datasheet, PDF (1/7 Pages) Molex Electronics Ltd. – HAND CRIMP TOOL Specification Sheet

Hand Crimp Tool for 2.50mm (.098”) / 3.00mm (.118”) Pitch Wire-to-Board Female Crimp Terminal
HAND CRIMP TOOL
Specification Sheet
Order No. 63823-5200
FEATURES
TYPE 4D
A full cycle ratcheting hand tool ensures complete crimps
Ergonomic soft grip handles for comfortable crimping
A precision user-friendly terminal locator wire stop holds terminals in the proper crimping position
Right and Left handed applications
This tool is WHMA-IPCA620 Class 2 compliant as indicated
This tool is RoHS compliant, however RoHS compliant is not required
SCOPE
Products: 2.50mm (.098”) / 3.00mm (.118”) Pitch Wire-to-Board Female Crimp Terminal, 16–20 AWG
Terminal Series No.
Terminal Order No.
Loose Piece
Reel
Wire Size
AWG mm²
Insulation Diameter
mm
In.
Strip Length
mm
In.
50350
50350-9101 50350-9001 16-20 1.30-0.50 1.70-2.60 .067-.102 2.80-3.40 .110-.134
Customer to cut off terminal from reel: 0.30mm (.012”) maximum Cut-off Tab.
DEFINITION OF TERMS
BEND UP
BRUSH
BELL MOUTH
CONDUCTOR
CRIMP
INSULATION
CRIMP
ROLLING
STRIP
LENGTH
BEND
DOWN
TWISTING
CRIMP HEIGHT
The above terminal drawing is a generic terminal representation. It is not an image of a terminal listed in the scope.
Doc No: ATS-638235200
Revision: A
Release Date: 06-17-10
Revision Date: 06-17-10
UNCONTROLLED COPY
Page 1 of 7