0638235175 Datasheet, PDF (1/7 Pages) Molex Electronics Ltd. – Application Tooling Specification Sheet

Hand Crimp Tool for 2.0 W/B Crimp Receptacle Terminal & SMEC Crimp Receptacle Terminal
HAND CRIMP
TOOL
Application Tooling
Specification Sheet
TYPE 4D
Order No. 63823-5100
FEATURES
A full cycle ratcheting hand tool ensures complete crimps
Ergonomic soft grip handles for comfortable crimping
A precision user-friendly terminal locator wire stop holds terminals in the proper crimping position
Right and Left handed applications
This tool is WHMA-IPCA620 Class 2 compliant as indicated
This tool is RoHS compliant, however RoHS compliant is not required
SCOPE
Products: 2.0 W/B Crimp Receptacle Terminal & SMEC Crimp Receptacle Terminal, 22-26 AWG.
Terminal Series No.
Terminal Order No.
Loose Piece
Reel
Wire Size
AWG mm²
Insulation Diameter
mm
In.
Strip Length
mm
In.
50372
50372-8100 50372-8000 22-26 0.35-0.12 0.95-1.40 .037-.055 1.30-1.80 .051-.071
56161
56161-8181 56161-8081 22-26 0.35-0.12 1.05-1.40 .041-.055 1.30-1.80 .051-.071
Customer to cut off terminal from reel: 0.15mm (.006”) maximum Cut-off Tab.
DEFINITION OF TERMS
BEND UP
BRUSH
BELL MOUTH
CONDUCTOR
CRIMP
INSULATION
CRIMP
ROLLING
STRIP
LENGTH
BEND
DOWN
TWISTING
CRIMP HEIGHT
The above terminal drawing is a generic terminal representation. It is not an image of a terminal listed in the
scope.
Doc No: ATS-638235100
Revision: B
Release Date: 06-17-10
Revision Date: 11-23-11
UNCONTROLLED COPY
Page 1 of 7