0638234975 Datasheet, PDF (1/8 Pages) Molex Electronics Ltd. – HAND CRIMP TOOL Specification Sheet

Hand Crimp Tool for 2.00mm (.079") Pitch Micro Blade Board-In Crimp Terminals
HAND CRIMP TOOL
Specification Sheet
Order No. 63823-4900
FEATURES
TYPE 4D
A full cycle ratcheting hand tool ensures complete crimps
Ergonomic soft grip handles for comfortable crimping
A precision user-friendly terminal locator wire stop holds terminals in the proper crimping position
Right and Left handed applications
This tool is WHMA-IPCA620 Class 2 compliant as indicated
This tool is RoHS compliant, however RoHS compliant is not required
SCOPE
Products: 2.00mm (.079") Pitch Micro Blade Board -In Crimp Terminal 26-30 AWG.
Terminal Series No.
Terminal Order No.
Loose Piece
Reel
Wire Size
AWG mm²
Insulation Diameter
mm
In.
Strip Length
mm
In.
50034
50034-8100 50034-8000 26-30 0.12-0.05 0.80-1.40 .031-.055 1.40-1.90 .055-.075
Customer to cut off terminal from reel: 0,.2mm (.008”) maximum Cut-off Tab.
DEFINITION OF TERMS
BEND UP
BRUSH
BELL MOUTH
CONDUCTOR
CRIMP
INSULATION
CRIMP
ROLLING
STRIP
LENGTH
BEND
DOWN
TWISTING
CRIMP HEIGHT
The above terminal drawing is a generic terminal representation. It is not an image of a terminal listed in the scope.
Doc No: ATS-638234900
Revision: A
Release Date: 04-09-10
Revision Date: 04-09-10
UNCONTROLLED COPY
Page 1 of 8