0638232870 Datasheet, PDF (1/6 Pages) Molex Electronics Ltd. – Application Tooling Specification Sheet

Hand Crimp Tool for Sabre Female Flat Blade Crimp Terminals
Modular Crimp Head
Order No. 63823-2870
Application Tooling
Specification Sheet
TYPE 4A
Hand Crimp Tool
Order No. 63823-2800
FEATURES
% A full cycle ratcheting hand tool ensures complete crimps
% Ergonomically designed soft handles
% Precisely designed crimping profiles with simple contact positioning
% Easy handling due to outstanding force ratio
% Modular Crimp Head is removable and can be use in the Air Powered Tool Order No.63816-0100,
accompanied by Air Powered Crimp Adapter (Order No. 63816-0700).
% Can also be used in the Battery Powered Tool Order No. 63816-0200 (110 V) or 63816-0250 (220 V)
accompanied by Battery Powered Crimp Adapter (Order No. 63816-0600).
SCOPE
Products: Sabre Female Flat Blade Crimp Terminals, 18-20 AWG, UL1056 and SPT-3 wires.
Terminal Series No.
Terminal
Order No.
Wire Size and Type
AWG mm² Type
Insulation Diameter Strip Length
mm
In.
mm
In.
18 0.80 UL1056 4.27 Max .168 Max
43375
43375-3001 20 0.50 UL1056 3.98 Min .157 Min 3.96-5.54 .156-.218
18 0.80 SPT-3 4.57 Max .180 Max
Insulation crimp to meet IPC/WHMA-A-620 Class 2 compliance.
Note: Terminal will accommodate the UL1056 and SPT-3 wires.
For UL1015 wires use Hand Tool 63823-2700.
SPT-3 wire is only available in 18 AWG.
Customer to cut off terminal from reel: 0.30mm (.012”) maximum Cut-off Tab.
Doc No: ATS-6382328HM Release Date: 08-24-10
Revision: A
Revision Date: 08-24-10
UNCONTROLLED COPY
Page 1 of 6