0638192900 Datasheet, PDF (1/7 Pages) Molex Electronics Ltd. – Application Tooling Specification Sheet

Hand Crimp Tool For Low Force Micro-Fit 3.0™ Crimp Terminals
HAND CRIMP
TOOL
Application Tooling
Specification Sheet
TYPE 4D
Order No. 63819-2900
FEATURES
A full cycle ratcheting hand tool ensures complete crimps
Ergonomic soft grip handles for comfortable crimping
A precision user-friendly terminal locator wire stop holds terminals in the proper crimping position
Right and Left handed applications
This tool is IPC/WHMA A-620 Class 2 compliant
This tool is RoHS compliant, however RoHS compliant is not required
SCOPE
Products: Low Force Micro-Fit 3.0™ Crimp Terminals, 20-30 AWG.
Terminal Series No.
Terminal Order No.
Reel
Wire Size
AWG mm²
Insulation Diameter
mm
In.
Strip Length
mm
In.
46235
46235-0001
46235-5001
46235-0003
46235-5003
46235-0002
46235-5002
46235-0004
46235-5004
20-24
26-30
0.50-0.20
0.13-0.05
1.30-1.85
1.12-1.27
.051-.073
.044-.050
2.54-2.92
.100-.115
Customer to cut off terminal from reel: 0.25mm (.010”) maximum Cut-off Tab.
DEFINITION OF TERMS
BRUSH
BELL MOUTH
CONDUCTOR
CRIMP
INSULATION
CRIMP
BEND UP
ROLLING
STRIP
LENGTH
TWISTING
BEND
DOWN
CRIMP HEIGHT
The above terminal drawing is a generic terminal representation. It is not an image of a terminal listed in the
scope.
Doc No: ATS-638192900 Release Date: 12-10-08
Revision: B
Revision Date: 09-22-10
UNCONTROLLED COPY
Page 1 of 7