0638132400 Datasheet, PDF (1/2 Pages) Molex Electronics Ltd. – Application Tooling Specification Sheet

Extractor Tool for 0.6mm (.02") CP Crimp Terminals
Extractor Tool
Application Tooling
Specification Sheet
Order No. 63813-2400
FEATURES
This Extractor Tool is for the removal of 98913 and 64322 Series female terminals from CMC connector.
SCOPE
Products: 0.6mm (.02") CP Crimp Terminal for CMC connector.
Terminal
Series No.
64322
98913
Description
0.635mm (.025")
CP Female Terminal
0.635mm (.025")
CP Female Terminal
Housing
Series No.
98835, 98993,
98994,and 98995
98835, 98993,
98994,and 98995
64322-1019
64322-1239
64322-1359
98913-1019
98913-1239
98913-1359
Terminal Order No.
64322-1029 64322-1039 64322-1219
64322-1319 64322-1329 64322-1339
98913-1029 98913-1039 98913-1219
98913-1319 98913-1329 98913-1339
98913-1419 98913-3019 98913-3029
64322-1229
64322-1349
98913-1229
98913-1349
98913-3039
OPERATION:
When removing a damaged crimped wire from the CMC connector follow the steps below:
1. The secondary lock on the CMC connector will need to be opened first. See Figure 1.
2. Using a screwdriver insert the flat edge under the tab of the secondary lock and pull up. Use your fingers
to open the lock completely.
SECONDARY LOCK
WIRE
SCREWDRIVER
Figure 1
CMC
CONNECTOR
Doc No: ATS-638132400
Revision: C
Release Date: 04-13-07
Revision Date: 02-28-12
UNCONTROLLED COPY
Page 1 of 2