0638119575 Datasheet, PDF (1/6 Pages) Molex Electronics Ltd. – Application Tooling Specification Sheet

Hand Crimp Tool for OBD II 4.00mm (.157") Wire-to -Wire Crimp Terminal
Modular Crimp Head
Order No. 63811-9570
Application Tooling
Specification Sheet
TYPE 4A
Hand Crimp Tool
Order No. 63811-9500
FEATURES
% A full cycle ratcheting hand tool ensures complete crimps
% Ergonomically designed soft handles
% Precisely designed crimping profiles with simple contact positioning
% Easy handling due to outstanding force ratio
% Modular Crimp Head is removable and can be use in the Air Powered Tool Order No.63816-0100,
accompanied by Air Powered Crimp Adapter (Order No. 63816-0700).
% Can also be used in the Battery Powered Tool Order No.63816-0200 (110 V) or 63816-0250 (220 V),
accompanied by Battery Powered Crimp Adapter (Order No. 63816-0600).
SCOPE
Products: OBD II 4.00mm (.157") Wire-to -Wire Crimp Terminal, 0.30-0.85mm² and 18-22 AWG.
Terminal
Series No.
50420
Terminal Order No.
50420-8100 (loose)
50420-8000 (reel) *
Wire Size
AVS-0.3, AVS-0.3f
22AWG
AVS-0.5, AVS-0.5f
AVSS-0.5, AVSS-0.5f
CAVS-0.5
20AWG
AVS-0.75f, AVSS-0.75f
AVS-0.85, AVSS-0.85
CAVS-0.85
18AWG
Actual mm²
0.37
0.35
0.56
0.50
0.79
0.88
0.80
Wire Type
JASO
TXL
JASO
TXL
JASO
JASO
TXL
Insulation Diameter
mm
In.
1.60-1.90 .063-.075
1.60-1.90 .063-.075
1.60-2.10 .063-.083
1.60-2.10 .063-.083
1.80-2.30 .071-.090
1.80-2.30 .071-.090
1.80-2.30 .071-.090
Strip Length
mm
In.
3.00-3.70 .118-.146
3.00-3.70 .118-.146
3.00-3.70 .118-.146
3.00-3.70 .118-.146
3.00-3.70 .118-.146
3.00-3.70 .118-.146
3.00-3.70 .118-.146
* Note: When using reeled parts, the cut-off tab must be maintained below 0.20mm (.008”)
Doc No: ATS-6381195HM Release Date: 08-03-07
Revision: B
Revision Date: 08-10-10
UNCONTROLLED COPY
Page 1 of 6