0638116300 Datasheet, PDF (1/5 Pages) Molex Electronics Ltd. – Hand Crimp Tool Specification Sheet

Hand Crimp Tool for MicroClasp™ 2.00mm (.079") Pitch Female Crimp Terminal
Hand Crimp Tool
Specification Sheet
Order No. 63811-6300
FEATURES
TYPE 4A
A full cycle ratcheting hand tool ensures complete crimps
Ergonomically designed soft handles
Precisely designed crimping profiles with simple contact positioning
Easy handling due to outstanding force ratio
SCOPE
Products: MicroClasp™ 2.00mm (.079") Pitch Female Crimp Terminal, 22-26 AWG.
Terminal
Terminal Order No.
Series No. _{Loose Piece Reel (1)}
Wire Size
Insulation Diameter
IPC/WHMA-A60 (2)
Terminal (3)
AWG mm² mm
In.
mm
In.
22 0.34 1.65 0.065
56134-8100 56134-8000 24 0.20 1.45 0.057 1.25-1.70 .049-.067
26 0.13 1.30 0.051
56134
22 0.34 1.65 0.065
56134-9100 56134-9000
24
26
0.20
0.13
1.45
1.30
0.057 0.90-1.70 .035-.067
0.051
28 (4) -
-
-
-
-
(1) Customer to cut off terminal from reel: 0.15mm (.006") maximum Cut-off Tab.
(2) To achieve optimum IPC-A620 Class 2 insulation crimps, use this insulation OD using UL1007 wire.
(3) Overall insulation OD specification for terminal.
(4) 28ga wire is not recommenced for use in this terminal, use 22-26ga wire for better crimp quality.
Strip Length
mm
In.
1.60-2.00 .063-.079
1.60-2.00 .063-.079
-
-
DEFINITION OF TERMS
BRUSH
BELL MOUTH
INSULATION
CRIMP
SEAM
BEND UP
ROLLING
STRIP
LENGTH
BEND
DOWN
TWISTING
CUT-OFF TAB
CONDUCTOR
CRIMP COND.CRIMP
HEIGHT
The above terminal drawing is a generic terminal representation. It is not an image of a terminal listed in the
scope.
Doc No: ATS-638116300
Revision:C
Release Date: 08-25-06
Revision Date: 05-20-08
UNCONTROLLED COPY
Page 1 of 5