0638110070 Datasheet, PDF (1/4 Pages) Molex Electronics Ltd. – Application Tooling Specification Sheet

1.25mm (.049") Pitch Wire–To-Board Crimp Receptacle Terminal
HAND CRIMP
TOOL
Application Tooling
Specification Sheet
TYPE 7
Order No. 63811-0000
FEATURES
% This tool is designed to be used with reeled product due to the small size of the connector
% This tool is designed for prototype work only and is not designed for production
% The reeled product must be cut into 1-inch strips to be processed in this hand tool
SCOPE
Products: 1.25mm (.049") Pitch Wire–To-Board Crimp Receptacle Terminal, 26-32 AWG.
Terminal Terminal Order No.
Wire Size Insulation Diameter Strip Length
Series No.
Reel Only
AWG mm²
mm
In.
mm
In.
50058
50058-8000
50058-8099
50058-8300
50058-8500
28-32
0.08-0.03
0.67-1.00
.027-.039
1.40-1.90
.055-.075
50079-8000 39-00-0413
• 50079 ^{50079-8053 39-00-0414 26-28 0.12-0.08 0.67-1.00 .027-.039 1.40-1.90 .055-.075}
50079-8099
• Requires Optional Tool Kit. See Page 4.
DEFINITION OF TERMS
BRUSH
BELL MOUTH
INSULATION
CRIMP
CONDUCTOR
CRIMP
BEND UP
ROLLING
STRIP
LENGTH
TWISTING
BEND
DOWN
CRIMP HEIGHT
The above terminal drawing is a generic terminal representation. It is not an image of a terminal listed in the
scope.
Doc No: ATS-638110000
Revision: F
Release Date: 01-25-95 UNCONTROLLED COPY
Revision Date: 02-20-12
Page 1 of 4