0011260060 Datasheet, PDF (1/1 Pages) Molex Electronics Ltd. – J5800-005 EXTRACTION TOOL PRODUCT SPECIFICATION

J5800-005 EXTRACTION TOOL
PRODUCT SPECIFICATION
1. Description
ATP-J5800-005E
2005/03/31, Rev.- A
Molex Japan Co., Ltd.
This tool is an extraction tool for the crimp terminal of Molex.
Please take the time to read attached the operating manual (IS-0009) of Extraction Tool,
making sure you understand the operating procedures described it before attempting to operate
this tool.
2. Specifications
1) Tool name:
J5800-005 Extraction Tool
2) Tool number:
J5800-005
3) Outer dimensions and weight: 70 (length) x phi10 (thickness) mm, Approx. 5gf
4) Management method:
Please insert the terminal pulled out once again after setting
up the lance in proper height.
5) Applicable housing and terminal: 2.5mm Pitch Wire-to-Wire Connector
Applicable hosing number
5240
Applicable terminal number
5241
3. Tool Appearance
Extraction part
Extraction of terminal
Housing
Extraction tool
J5800-005
Lance of terminal