0011260024 Datasheet, PDF (1/1 Pages) Molex Electronics Ltd. – JHTR5902 HAND CRIMP TOOL PRODUCT SPECIFICATION

JHTR5902 HAND CRIMP TOOL
PRODUCT SPECIFICATION
1. Description
ATP-JHTR5902E
2005/03/31, Rev.- A
Molex Japan Co., Ltd.
This tool is a hand crimp tool, which is designed for crimp-connecting a wire to crimp a terminal
of Molex.
Please take the time to read attached the operating manual (IS-0001) of Hand Crimp Tool,
making sure you understand the crimping procedures and management method described it
before attempting to operate this hand tool.
2. Specifications
1) Tool name:
JHTR5902 Hand Crimp Tool
2) Tool number:
JHTR5902
3) Outer dimensions and weight: 230 (width) x 70 (depth) x 15 (thickness) mm, Approx. 400gf
4) Management method:
Crimp strength (Details are described to the corresponding
crimp specification)
5) Applicable terminal and wires: Phi1.58mm Miniature Pin and Receptacle
Terminal number
5205
5206
5205
5206
Applicable wire size
(AWG)
#18
#16
#20x2
Applicable insulation
outer diameter (mm)
3.2
2.5
1.9x2
Wire insulation strip
length (mm)
2.7-3.3
2.7-3.3
3. Tool Appearance
Applicable Terminal
JHTR5902
5205, 5206
Phi1.58mm Miniature Pin and Receptacle