0011260005 Datasheet, PDF (1/1 Pages) Molex Electronics Ltd. – J5800-001 INSERTION TOOL PRODUCT SPECIFICATION

J5800-001 INSERTION TOOL
PRODUCT SPECIFICATION
1. Description
ATP-J5800-001E
2005/03/31, Rev.- A
Molex Japan Co., Ltd.
This tool is an Insertion Tool for the crimp terminal of Molex.
Please take the time to read attached the operating manual (IS-0004) of Insertion Tool, making
sure you understand the operating procedures described it before attempting to operate this
tool.
2. Specifications
1) Tool name:
J5800-001 Insertion Tool
2) Tool number:
J5800-001
3) Outer dimensions and weight: 105 (width) x 25 (depth) x 10 (thickness) mm, Approx. 20gf
4) Management method:
Please confirm that the terminal is locked surely with pulling
the wire lightly after inserting the terminal.
5) Applicable housing and terminal: 5025 Mini-Fit Connector
Applicable hosing number
Applicable terminal number
3. Tool Appearance
5025
5005, 5006, 5008, 5009
5505, 5506
Insertion of terminal
Insertion part
Tool point
Pull the wire
J5800-001
Terminal
Insulation barrel