45481 Datasheet, PDF (2/2 Pages) Molex Electronics Ltd. – Modular Plug and Socket Configured Assemblies

Fax to Molex at 630-512-8620
Molex Power Dock™ Connector ^Company
Assembly Design Form
Contact Name
Use this form to configure a Power Dock connector. Simply follow the step-by-step
Telephone
(
)
instructions below and fax this form to 630-512-8620. Once Molex has received _Signature
this form, a drawing will be created and sent to you for final approval.
STEP 1
Location
Title
Fax
(
)
Email Address
Date
Quantity Required
Choose from the following modules to create an assembly.
Mounting, Spacer and Guide Modules
Flange Modules
Spacer Modules
(without contacts)
Solder Terminated Modules
250V Power Modules (Vertical)
250V Power Modules (Right Angle)
PD500
Left Flange Mount
PD511
Vertical or Right Angle 250 V Spacer
PD100
Socket
PD101
Standard
PD102
Pre-mate
PD103
Post-mate
600V Power Modules (Vertical)
PD105
Standard
PD106
Pre-mate
PD107
Post-mate
600V Power Modules (Right Angle)
PD501
Right Flange Mount
PD513
Vertical or Right Angle 600 V Spacer
Guide Modules
PD116
Socket
PD117
Standard
PD118
Pre-mate
PD119
Post-mate
Signal Modules (Vertical)
PD121
Standard
PD122
Pre-mate
PD123
Post-mate
Signal Modules (Right Angle)
PD503 Passive
PD515 Active, M3 Threads
PD517 Active, 4-40 Threads
Vertical Guide Pins
PD502
Passive Vertical Guide Socket
PD301 24 Pin Socket
PD300 24 Pin Standard
PD302
24 Pin Standard
PD507
Passive Right Angle Guide Pin
PD506 Passive
PD516 Active
Right Angle Guide Sockets
PD313
6 Pin Socket
PD312
6 Pin Standard
Press-Fit Terminated Modules For 2.36mm (.093") or greater board thickness
Signal Modules (Vertical)
250V Power Modules (Vertical)
PD314
6 Pin Standard
PD401
24 Pin Socket
PD400
24 Pin
PD200
Socket
PD201
Standard
PD202
Pre-mate
PD203
Post-mate
600V Power Modules (Vertical)
PD413
6 Pin Socket
PD412
6 Pin
STEP 2
PD216
Socket
PD217
Standard
PD218
Pre-mate
PD219
Post-mate
Place your chosen module numbers in
the boxes at right (left to right) with the
mating side facing. For right angle
modules, the tails are to face downward.
First ^PD
PD
PD
PD
PD
PD
PD
PD
PD
PD
PD
PD
PD
PD
Assembly
Mating ^PD
PD
PD
PD
PD
PD
PD
PD
PD
PD
PD
PD
PD
PD
Assembly
STEP 3 - (Use for Solder Modules Only)
Place an “X” for the board thickness or
solder tail length of each assembly. Place an
“X” for retentive feature (see right for more
information).
Power Module with
retentive feature
Board Thickness
Solder Tail Length
First Assembly
Mating Assembly
1.57mm (.062")
2.92mm (.115")
2.36mm (.093")
3.60mm (.143")
Americas Headquarters
Lisle, Illinois 60532 U.S.A.
1-800-78MOLEX
[e-mail]
Order No. USA-196 Rev. 1
Far East North Headquarters
Yamato, Kanagawa, Japan
81-462-65-2324
[e-mail]
Far East South Headquarters
Jurong, Singapore
65-6-268-6868
[e-mail]
European Headquarters
Munich, Germany
49-89-413092-0
[e-mail]
Visit the Power Dock configurator website at www.power-dock.com
Printed in USA/2K/JI/JI/2005.07
3.17mm (.125")
4.50mm (.177")
Retentive
Feature
Corporate Headquarters
2222 Wellington Ct.
Lisle, IL 60532 U.S.A.
630-969-4550
©2005, Molex