98266 Datasheet, PDF (1/2 Pages) Molex Electronics Ltd. – Pitch Premo-Flex™

FEATURES AND SPECIFICATIONS
0.50, 1.00 and 1.25 mm
Pitch Premo-Flex^™
FFC Jumpers Provide High Density Interconnects in a Wide Variety of Standard and Custom
Lengths and Circuit Sizes (Even and Odd Circuit Sizes).
The complete line of 0.50 mm (98266), 1.00 mm
(98267) and 1.25 mm (98268) pitch Flat Flex Cable
jumpers offers custom length and circuit size.
Molex offers also an extensive range of FFC
connectors and is able to design customized FFC
connectors due to customer requirements.
98266, 98267, 98268
Flat Flex Cable Jumpers
for ZIF and non-ZIF FFC
connectors
The FFC Jumpers are terminated to either Zero
Insertion Force (ZIF) or non-ZIF FFC Pick-and-Place
Surface Mount Connectors.
FFC designs are also available for Automotive Bus
System wiring, enabling proper Impedance Continuity
between 83-150 Ohm and optionally screening
against EMI/RFI influences.
Features and Benefits
■ FFC Jumpers allow a light and small planar
structure to accommodate a high density wiring
solution.
■ All products are available in different circuit sizes
(up to 50) at dedicated custom lengths to meet
customers’ most stringent demand.
■ Available with contacting area on same or
opposite sides to mirror signal layout between
Printed Circuit Boards.
■ FFC products allow a high temperature
environment up to 105 °C to meet Industry
Standard requirements. Higher Specification
available upon request.
■ FFC Jumpers are very suitable for Movable
extension of Printed Circuit Boards and/or
Displays units etc. to enable easy assembly
processes.
■ FFC Jumpers are used in many industries and
applications where the total installed cost is
considered important.
■ Molex Jumpers are complementary to the
extensive Molex range of FFC connectors securing
perfect conductor alignment.
■ Molex Package offerings of FFC Jumpers and
Connectors enable attractive pricing and support
supplier reduction programs.
SPECIFICATIONS
Reference Information
Packaging: Box (1000 pcs)
FFC Tape: UL94 VTM-0
Mates With: Standard FFC Connectors or custom
developed connectors
Designed In: mm
Electrical
Voltage: 60 V
Current: 0.50 mm (98266): 0.5 A
1.00 mm (98267): 1.2 A
1.25 mm (98268): 1.4 A
Conductor Resistance:
0.50 mm (98266): max. 730 Ohms/km
1,00 mm (98267): max. 310 Ohms/km
1.25 mm (98268): max. 270 Ohms/km
Insulation Resistance: 10 MOhms
Mechanical
Abrasion: min. 10,000 cycles
Bending Radius: min. 5 mm
Physical
FFC Tape:
Material: Polyester + Flame retardant adhesive
Thickness: 0.067 mm nominal
Color: white
Reinforcement Tape:
Material: Polyester + adhesive
Thickness: 0.175 mm nominal
Color: transparent/yellow
FFC Conductor:
Material: Tin plated copper
Width: 0.30 mm (98266)
0.70 mm (98267)
0.80 mm (98268)
Thickness: 0.10 mm
Plating: tin min 1 µm
Operating Temperature: –40 to 105 °C