86114-9500 Datasheet, PDF (1/2 Pages) Molex Electronics Ltd. – Swivel EMI Shielding Adapters

FEATURES AND SPECIFICATIONS
Directional flexibility and Electro Magnetic
Interference (EMI) protection provided with
Molex’s swivel adapters
Swivel EMI Adapters provide a flexible means of re-
positioning the cable-exit angle off the face-plate, in
the factory or the in the field, without disassembly or
need for custom modules and cards. Available in LC
duplex, SC simplex or MPO simplex, the adapters
allow the cable-exit angle to be re-positioned from the
standard straight-mount position (90° to the face-
plate) to +/- 35° in either direction.
Swivel EMI adapters allow the flexibility for an
attached cable assembly to be routed to either the left
or right side of the frame for horizontal-mounted
adapters and up or down for vertically-mounted
adapters. The adapters allow the user to change easily
the routing direction as needed, depending on which
side the card is to be installed or which direction the
cable needs to be routed.
The swivel EMI adapters utilize a die-cast adapter with
EMI gasketing to minimize EMI leakage. A locking set-
screw is also provided to fix the angle position during
initial assembly. The swivel EMI adapter is available
for either single mode or multimode applications.
Swivel adapters are also available in a non-EMI
version assembled with standard polymer adapters
and without EMI gaskets.
Swivel EMI Shielding
Adapters
86114 MPO
86115 LC Duplex
86116 SC
Features and Benefits
I Flexible positioning of the adapter angle allows
directional cable routing
I Horizontal or vertical mounting can be used in
many applications
I Positive stop angle settings maintains the set
adapter angle
I Utilizes standard die-cast EMI adapters providing
EMI protection in all angles
I Common panel cut-out for all styles allows
interchangeability between LC, SC and MPO
adapters styles
I Shuttered adapters provide eye safety and dust
control
I Non-EMI adapter styles available providing cost
control when EMI suppression is not required
SPECIFICATIONS
Reference Information
Packaging: Individual bag
Mates With: Standard LC Duplex, MPO and SC
connectors
Designed In: Inches
Physical
Housing: Zinc die-cast
Alignment Sleeve: Zirconia Ceramic
Operating Temperature: -40 to +85° C
EMI Gasketing: Conductive fabric over foam and
conductive silicone