85719-0001 Datasheet, PDF (1/2 Pages) Molex Electronics Ltd. – HyperJack™ PoE+ Integrated Connector Module

Introduction
HyperJack™ PoE+
Integrated Connector
Module
Molex leads the market with the first PoE+ Integrated Connector Module
Power over Ethernet (PoE) is a technology that
defines the transmission of both data and power to
networked devices over a standard ethernet cable,
eliminating the need for separate power supplies.
PoE+ is the new IEEE 802.3at Power over Ethernet
standard. It provides the opportunity for switch
makers to increase port-power output to 30 watts and
will supersede the existing 15 watt 802.3af standard.
The specification of this new 802.3at standard is
backward compatible, supporting legacy 802.3af
devices.
Molex has developed the HyperJack PoE+ Integrated
Connector Module (ICM) in a 2x6 configuration.
Based on the RJ-45 jack, the ICM has integrated
PoE+ controller silicon to manage and deliver 30
watt Power over Ethernet. This is coupled with Gigabit
PoE+ magnetics, thermal management and a high
level of protection against electro static discharge
(ESD), electrical fast transient (EFT) and electro
magnetic interference (EMI). PoE+ according to the
IEEE standard requires Cat5 cable or higher.
The Molex PoE+ ICM complies to PoTec V2.0 with a
standardized footprint and register set, allowing for
simple drop-in upgrades and product expansion.
The Integrated Module provides the customer with
flexible port configurations and a fast migration
path from non-PoE to fully integrated PoE+ designs.
Simply provide a 51-56V and 3.3V power supply to
automatically manage and control power to connected
Ethernet devices such as voice over internet protocol
(VOIP) phones, wireless access points and security
cameras. Extra management can be achieved through
I²C communication.
85719 12-port 2x6 Ganged
Modular Jacks with
LEDs
Features and Benefits
„„ Fully integrated design
„„ Gigabit Ethernet magnetics
„„ Low power consumption 30W PoE+ controller
silicon
„„ Protection circuitry
„„ 2 Bi-color light emitting diodes (LED’s) per port
„„ Capability to indicate up to 8 operating states
„„ Thermally optimized design with excellent heat
dissipation
„„ IEEE802.3at (draft) and PoETec V2.0 (draft)
compliant
„„ Fast time to market by using a drop-in solution
to add PoE+ technology to a customers switch
„„ High-speed data transfer to 1000BASE-T
„„ Increased range of PoE+ powered devices
„„ Sophisticated protection against various
external disturbances: ESD, EFT, EMI
„„ Provides 0 to 70°C operating temperature
rating
„„ PoE+ technology in an industry standard
footprint
„„ Auto, semi-auto and manual mode capability
Markets and Applications
� Networking equipment with PoE function to
support IP phones, security cameras, wireless
access points, sensors and actuators, card
readers and vision systems
- Gigabit Ethernet Switches
- Routers
- Hubs
- Midspans
„„ Industrial Ethernet Applications
- Switches and Routers