79529-5002 Datasheet, PDF (1/2 Pages) Molex Electronics Ltd. – TelEnable® FDM (Fax/Data Module)

FEATURES AND SPECIFICATIONS
Small and flexible, Molex’s TelEnable FDM
transmits serial data and fax protocol over
digital wireless networks
The TelEnable FDM is the latest extension of the
TelEnable product family. Offering the combined
capabilities of FaxEnable™ and EMS-Enable™, the
FDM provides a smaller package, reliably transmitting
either a digital data stream, a digital fax or a 12-lead
ECG. Transmissions are sent via a digital cellular
network and can be delivered via a set of standard
protocols.
FDM can be powered using a standard 12V AC adapter
that connects via a four-position Micro-Fit 3.0™
connector. This power approach can be simpler and
more cost-effective for environments where 12V or
120V power is readily available.
The FDM can be configured or customized to fit many
data applications, leveraging the TelEnable protocol
conversion capabilities. These transmission capabilities
are extremely valuable in many market segments,
including utilities, railroad, automotive, remote
medical and security.
In standard configurations, the FDM can support
RS232, PSTN, Class III fax and V.92 modem protocols.
New variations are in development. For more
information please contact us at
[e-mail].
Features and Benefits
I “Bag-phone” replacement provides drop-in digital
solution for existing analog cellular applications
I Flexible design provides interface for new or
evolving protocols, enables compatibility and
minimizes user training
I Serial data option eliminates the need for old
modem technology
I Higher data transmission speeds help to lower data
collection costs
I Reliable data collection reduces re-tries and
eliminates manual readings
I Data encryption provides secure transmission and
receipt of information
TelEnable^® FDM
(Fax/Data Module)
79529
SPECIFICATIONS
Reference Information
Designed In: Millimeters
Communications Interface: RS-232C and Telco
(Tip/Ring)
Serial Data Rates: Up to 115.2 kbps supported
Packaging: Corrugated carton with partition
Interconnects: 9 position d-sub (male), 4 position
Micro-Fit 3.0™, RJ-45 with Lightpipes
Outputs for status indicators
Field configurable using touchtone phone and serial
interface
Analog phone interface standard, including:
ring-down,dial-tone and DTMF decode
Works with any circuit data-enabled wireless phone,
including CDMA, PCS, TDMA, GSM/GPRS and IDEN
Protocols Supported: Group III Fax, V.92 Modem
Physical
Dimensions: 145.3mm L x 140.2mm W x 47.8mm H
(5.7”L x 5.5”W x 1.7”H)
Weight: 0.484 kg (17.1 oz)
Material: FR-4 PCB
Operating Temperature: -20 to +70° C (-4 to +158° F)
Storage Temperature -40 to +85° C (-40 to +185° F)
Electrical
Operating Voltage: 12V DC at 0.5A