79525-5000 Datasheet, PDF (1/2 Pages) Molex Electronics Ltd. – EMS-Enable™ System

FEATURES AND SPECIFICATIONS
EMS-Enable™ System
Transmit Life-Saving ECG Signals Over the Digital Wireless Network With Molex’s
EMS-Enable Units
EMS-Enable units provide a cost-effective, reliable
system for sending and decoding an ECG
(Electrocardiogram) from a vehicle to a hospital
environment. Transmissions are sent via the digital
cellular network and are received by a fax machine or
printer.
EMS-Enable unit transmits a 12-lead ECG from a mobile
environment to a hospital or other designated receiving
area. Transmission from the portable EMS-Enable unit
is received by a fax machine or printer connection. The
EMS-Enable unit is capable of sending via fax output
from most existing 12-lead heart monitors.
The EMS-Enable Hub acts as the decoder and is located
at the hospital or communications center. Able to
handle up to four simultaneous connections, the EMS-
Enable hub prints a clear, unmodified 12-lead ECG code
on a local printer. In addition, the ECG can be
forwarded by the hub to a remote fax machine.
EMS-Enable Unit – 79525
EMS-Enable Hub – 79528
Features and Benefits
I Clean, unmodified fax of 12-lead ECG transmits
digitally over the digital cell network
I FDA 510(k) cleared meets government compliance
requirements
I EMS-Enable Units support storage for up to six
pages of simple fax information which guarantees
reliable delivery of the fax
I EMS-Enable Hub supports logging of all incoming
faxes, handles storage for up to 500 faxes and
allows for files to be easily downloaded to a PC to
ensure archiving needs
I Compact packaging and easy-mounting (even in an
inverted position) provides flexibility
I Data encryption guarantees security transmission
and receipt of information
I LED status indicators and power management
features provide confirmation of successful fax
transmission
EMS-Enable Unit
EMS-Enable Hub
SPECIFICATIONS
EMS-Enable Unit
Reference Information
Packaging: Corrugated carton
Communications Interface: RS-232C and Telco
(Tip/Ring)
Interconnects: RJ-11 for fax, DB9 for cell phone, four-
position Molex Micro-Fit 3.0™ for battery charger
Physical
Dimensions: 209.6mm L x 166.6mm W x 90.4mm H
(8.25” L x 6.56” W x 3.56” H)
Enclosure: Copolymer Polypropylene
Operating Temperature: 0 to +50°C (+32 to +122°F)
Storage Temperature: -40 to +80°C (-40 to +176°F)
Electrical
Operating Voltage: 12V DC @ 0.5A
EMS-Enable Hub
Reference Information
Packaging: Corrugated carton
Interconnects: Interconnects: four (4) RJ-11 for
telephone, one (1) RJ-45 for Ethernet/Network,
two (2) USB for printer, one (1) Power outlet
(standard three-prong)
Physical
Dimensions: 305.0mm L x 381.0mm W x 64.0mm H
(12.0” L x 15.0” W x 2.5” H)
Enclosure: Black powder-coated Steel
Operating Temperature: 0 to +50° C (+32 to +122°F)
Storage Temperature: -40 to +80° C (-40 to +176°F)
Electrical
Operating Voltage: 120V AC @ 1.0A