79516-1021 Datasheet, PDF (1/2 Pages) Molex Electronics Ltd. – Micro-Fit 3.0™ Overmolded Cable Assemblies

FEATURES AND SPECIFICATIONS
Double-ended, Overmolded Assemblies with strain relief are available in multiple circuit sizes
and cable lengths for a rugged signal connection
Micro-Fit 3.0 Overmolded Cable Assemblies are
designed to meet the need for a high contact-density
connector for signal or power applications. Available in
2, 4, 6 and 10 circuit sizes and 1, 3 and 5 meter
lengths, the assemblies incorporate an overmolded
strain relief mechanism for reduced mechanical stress.
The double-ended cable assemblies are capable of
carrying 5 amperes of current. The housing features
fully isolated contacts on each side of the connection,
offering electrical and mechanical protection to the
terminals. The overmolded strain relief reduces the
mechanical stress on the wires and terminals during
the mating and un-mating cycles. A positive latch on
the housing prevents accidental disconnection caused
by rough handling.
These Overmolded Cable Assemblies complement the
broad line of Molex’s Micro-Fit 3.0 offerings. With
more than 500 part numbers and still growing, this
expansive product line offers through hole and SMT
options. SMT versions are available in tape and reel
packaging for robotic placement on the PCB.
3.00mm (.118”) Pitch
Micro-Fit 3.0™
Overmolded Cable Assemblies
79516
Features and Benefits
I Fully polarized housing prevents accidental mis-
mating
I Positive latch prevents accidental disconnects
I Locking tang on terminal secures terminals in the
housings
I Overmolded strain relief reduces the mechanical
stress on the wires and terminals
I Double-ended assemblies provide a variety of
application options
SPECIFICATIONS
Reference Information
Packaging: Bag
Mates With: 43020 and 43045
Designed In: Millimeters
Electrical
Voltage: 250V
Current: 3.0A max.
Contact Resistance: 10 milliohms max.
Dielectric Withstanding Voltage: 1500V AC
Insulation Resistance: 1000 Megohms min.
Mechanical
Contact Insertion Force: 1.5kgf (3.31 lbf) max.
Contact Retention to Housing: 2.5kgf (5.51 lbf) min.
Mating Force: 1.0kgf (2.20 lbf) max. per contact
Unmating Force: 3.7N (0.83 lbf) per circuit
Durability: Male connectors up to 30 cycles at a
maximum rate of 10 cycles per minute
Physical
Housing: Polyester
Flammability: UL 94V-0
Contact: Phosphor Bronze
Plating:
Contact Area — Phosphor Bronze
Solder Tail Area — Tin (Sn)
Overmolding: PVC, Black, 15% Glass-filled
Flammability: UL 94V-2
Operating Temperature: -40 to +105°C