73415-4500 Datasheet, PDF (1/1 Pages) Molex Electronics Ltd. – Manual RF Coaxial Crimp Tool

Manual Coaxial Crimp Tool From Molex’s RF Division is Designed To
Accommodate a Range Of Hex Sizes For Use With the Most Popular
RF Connectors
The manual RF crimp tool includes two die sets designed for the following hex
crimp sizes:
■ Die Set One: 2.67mm (.105"), 3.25mm (.128"), 3.84mm (.151")
■ Die Set Two: 4.06mm (.160"), 4.52mm (.178"), 5.41mm (.213")
The versatility of the crimp sizes ensures quality crimping of connectors. This
crimp tool was designed to work with most RF connectors.
Features and Benefits
■ Soft, padded handles are easier on operators’ hands
■ Durable high carbon steel tool frame and die sets promote longer tool and
die life
■ Full ratchet release assures complete cycle for every crimp operation
■ Emergency ratchet release allows release of tool if improper hex size is
selected
■ Angled head position improves comfort with repeated operation
■ Interchangeable die sets accommodate a range of hex sizes in a single tool
Applications
■ All markets using coaxial cable assemblies
- Small cable assembly runs
- Prototypes
- Field installation
- Engineering labs
Manual RF Coaxial Crimp Tool
73415-4550
With Two Die Sets
ORDERING INFORMATION
Order No.
73415-4500
Description
Manual RF Coaxial Crimp tool with
Two Die Sets
Die Set One
2.67mm (.105")
3.25mm (.128")
3.84mm (.151")
Hex Size
Die Set Two
4.06mm (.160")
4.52mm (.178")
5.41mm (.213")
RF/Microwave Connector Division
Mooresville, IN 46158
317-834-5600
[e-mail]
Far East North Headquarters
Yamato, Kanagawa, Japan
81-462-65-2324
[e-mail]
Far East South Headquarters
Jurong, Singapore
65-6-268-6868
[e-mail]
European Headquarters
Munich, Germany
49-89-413092-0
[e-mail]
Order No. USA-233
Visit our Web site at www.molex.com/product/rf/coax_crimp_tool.html
Printed in USA/JI/2004.04
Corporate Headquarters
2222 Wellington Ct.
Lisle, IL 60532 U.S.A.
630-969-4550
Fax:[phone]
©_{2004, Molex}