45984 Datasheet, PDF (1/3 Pages) Molex Electronics Ltd. – EXTreme LPHPower™ Low-Profile Hybrid Power Connector

FEATURES AND SPECIFICATIONS
The EXTreme LPHPower™ Connector is a mixed, high-current power and signal connector system that picks
up where traditional connectors leave off. Designed with power blades parallel to the PC board, its extremely
low-profile height of only 7.50mm (.295”) allows greater system airflow while taking up 53% less space than
traditional connectors with the same current rating. Designed as a new generation of power interconnect, Molex’s
EXTreme LPHPower™ connector provides up to 127.0A per linear inch of space, has two isolated power blades in
each housing bay and can be mated in a right angle, co-planar or vertical orientation. EXTreme LPHPower™ can be
mated in a traditional two-piece connector system, or as a one-piece receptacle-to-cardedge / bus bar application.
Features and Benefits
n Low-profile design, 7.50mm height enhances
system airflow and provides 127.0A per linear inch
n Receptacle sides mates to either our standard LPH
plug or an industry standard 1.57mm PBC gold
finger card edge
n Rated for current interruption hot-plugging
requirements
n R ugged signal and power contacts reduce the
potential for stubbing or damage
n Two isolated power contacts per housing bay (top
and bottom)
n Tested per EIA-364-1000.01
n L ast-mate/first-break available on power contacts
EXTreme LPHPower™
Low-Profile Hybrid
Power Connector
45984 Right Angle
Receptacle
46114 Vertical Receptacle
45985 Right Angle Plug
SPECIFICATIONS
Reference Information
Packaging: Tray or Tube
UL File No.: E29179
CSA File No.: LR19980
TUV: 30683046.001
Designed In: Millimeters
Electrical
Voltage: 250V max
Current (at 30° C Temperature rise):
Power – 30.0A max.
Signal – 1.0A max.
Contact Resistance (per contact):
Initial End of Life
Power (milliohms) 0.50 0.64
Signal (milliohms) 6.24 8.34
Dielectric Withstanding Voltage: 1500V
Insulation Resistance: 5000 Megohms min.
Current interruption:
Power – 30.0A and 48V DC
Signal – 1.0A at 30V
Mechanical
Mating Force (max. per circuit):
Power Contacts – 6.87N (1.54 lb)
Signal Contacts – 1.08N (0.24 lb)
Un-mating Force (max per circuit):
Power Contacts – 5.88N (1.32 lb)
Signal Contacts – 0.02N (0.03 lb)
Durability: 250 cycles
(Receptacle and Plug)
Physical
Housing: LCP
Contact:
Power Contacts - Copper (Cu) Alloy
Signal Contacts – Phosphor Bronze
ORDERING INFORMATION
Series*
Description
Power Circuit
45984
Right Angle Receptacle
4 to 10
46114, 46112, 46113
Vertical Receptacle
2 to 14
45985
Right Angle Plug
4 to 10
*Complete part numbers can be found at www.molex.com/link/ext-power.html
Signal Circuit
12 to 40
12 to 40
12 to 40
Plating:
Contact Area — Select Gold
Solder Tail Area — Tin
Underplating — Nickel
Flammability Rating: UL-94V-0
Documents
Sales Drawings: SD-45984-XXX, SD-45985-XXX,
SD-46114-XXX, SD-46112-XXX, SD-46113-XXX
Product Specs:
Right Angle — PS-45984-001
Vertical — PS-46114-001
Application Tooling:
Vertical ATS — 6 2100-6300, 62201-8671,
62201-8672
Guide
Optional
Optional
Optional
Board Peg
Optional
N/A
Optional
PCB Thickness
1.57, 2.36, 6.35mm
(.062, .093, .250”)
1.57mm min. (.062”)
1.57, 2.36, 6.35mm
(.062, .093, .250”)