44245-0010 Datasheet, PDF (1/2 Pages) Molex Electronics Ltd. – Board-to-Board Connector Hermaphroditic

FEATURES AND SPECIFICATIONS
1.27mm (.050") Pitch
SliderZ™
Board-to-Board Connector
Hermaphroditic
SliderZ is a one-piece, board-to-board connector
system that uses a “slide” action in the vertical Z-axis
to minimize assembly and service costs for mated
printed circuit boards (PCBs). SliderZ allows the user
to mate or remove one PCB while leaving the adjacent
PCB undisturbed.
SliderZ features a hermaphroditic design, so the same
connector is used in the mated pair. The connector has
a 1.27mm (.050”) pitch centerline spacing and is
available in 10 through 60 select circuit sizes for a
range of applications. Select-gold plating on the
contacts ensures durability up to 1000 mating cycles.
Prominent finger pulls allow for ergonomic handling
and minimize stress to the board and connector.
The versatile SliderZ connector is ideal for low power
and signal applications where easy servicing,
upgrading or plug-in expansion of PCBs is preferred.
Features and Benefits
s Innovative “slide” Z-axis mating action enables
efficient assembly, servicing and retrofitting of
PCBs
s Hermaphroditic, single-connector system simplifies
ordering and reduces inventory costs
s Guide rails and generous lead-ins help simplify
installation and allow Z-axis misalignment of PCBs
up to 1.59mm (.062”) for wider assembly
tolerances
s Solder tails of 2.79mm (.110”) length fit in
standard 1.59mm (.062”) thick PCBs
s Press-fit board locks hold down the connector
firmly to the PCB during soldering process
s Optional caps available to protect contacts during
shipment and board attachment