16-06-0034 Datasheet, PDF (1/2 Pages) Molex Electronics Ltd. – Product Compliance Statement

Product Compliance Statement
April 01, 2014
Molex is committed to managing the use of chemical substances in accordance with governmental
regulations, industry standards, and customer-specific requirements in order to protect the
environment. For each part listed, this document provides:
• EU RoHS Compliance Status. EU RoHS status is declared per Directive 2011/65/EU and its
subsequent amendments. Homogeneous materials of parts that are compliant to this legislation have
less than 0.1% by weight each of lead, mercury, hexavalent chromium, PBB, and PBDE, and 0.01%
by weight of cadmium. In situations where an exemption applies, the preceding limits, corresponding
to the exempted substance(s), may be higher.
• EU REACH SVHC Content. Substances of Very High Concerns (SVHCs) are declared if
above 0.1% of the article per Regulation (EC) No. 1907/2006 and its subsequent amendments.
The Candidate List of SVHCs is continually updated at http://echa.europa.eu/chem_data/
authorisation_process/candidate_list_table_en.asp . The current revision was used in this
declaration.
• Low-Halogen Status. Homogeneous materials of parts that are considered Low-Halogen
have less than 0.09% by weight each of bromine and chlorine, and less than 0.15% by weight of the
sum of bromine and chlorine.
Molex’s sole liability for incorrectly certifying a product shall be either replacement of the Molex
product or, alternatively and in the sole discretion of Molex, return of the purchase price paid for the
relevant Molex product.
For additional information regarding Molex's environmental initiatives and further explanation of this
information, please visit www.molex.com
Joel F. Eurich
Director, Global Environmental, Health & Safety (EH&S)