121201 Datasheet, PDF (1/4 Pages) Molex Electronics Ltd. – Brad® mPm® DIN Valve Connectors New Generation

Introduction
Brad^® mPm^® DIN Valve
Connectors
New Generation
The new generation of DIN Valve Connectors with unsurpassed IP67 sealing performance and
superior cable retention, designed to improve performance and reliability and reduce overall
implied costs in hydraulic, pneumatic and electro magnetic devices.
The Brad^® product line extends its range by
introducing the new generation of external thread,
field attachable DIN valve connectors. The mPm^®
range of connectors conforms to Industry Standard
EN 175301-803 (formerly DIN43650). The DIN valve
connector is designed to save time and money, while
improving overall performance and reliability. This
innovative design reduces the number of components,
making it easier to assemble with fewer parts to stock.
Traditional connectors are supplied pre-assembled
requiring the operator to disassemble the connector
before terminating the cable. This new generation
of connectors is supplied in single set or bulk
components, reducing dis-assembly time and cost.
The Brad^® mPm^® products are recognised throughout
the industry for their performance and reliability. The
new generation design has an external nut to provide
greater and consistent torque which ensures good
cable retention, high reliability and together with
the integrated front gasket, a sealing performance
from dust and water to IP67. Cable retention force
is increased by up to 115% when compared with
traditional internal nuts. Traditional Form A and B
connectors require three different styles for PG7, PG9
and PG11cable. However, the new external nut design
can accomodate both PG9 and PG11 cable and up to
9mm cable outer diameter and since one size fits all,
the customer can reduce their connector inventory.
Molex new generation of DIN connectors is currently
available in field attachable Form A and Form B.
Form C is under development and will be released
late 2009.
121201 DIN Form A
121207 DIN Form A+Circuit
121202 DIN Industrial Form
121208 DIN Industrial
Form+Circuit
121203 DIN Form B
121209 DIN Form B+Circuit
*DIN Form C
*DIN Form Micro
*Under Development -

Release due late 2009
Features and Benefits
„„ Unsurpassed IP67 sealing performance
„„ Accomodates PG9, PG11 and up to 9mm cable
outer diameter
„„ Integrated front gasket within the housing
„„ Ergonomic external nut design
„„ Cable retention is increased by 115% compared
with internal nut designs
„„ Fewer components reduces customer inventory
and simplifies assembly
„„ Product is supplied in a ready-to-use condition
which saves the customer an estimated 20
seconds dis-assembly time per connector
Applications
Industrial
� Solenoid valves
„„ Pneumatics
„„ Hydraulics
„„ Gas valves
„„ Pressure switches
„„ Transducers
„„ Cylinders
Non Automotive-Transport
„„ Garbage trucks
„„ On truck crane and lifting equipment
„„ Used across all markets where signal and power
connections are required to perform in a rugged
environment