MVIH_13 Datasheet, PDF (2/2 Pages) MMD Components – MVIH Series VCXO

Part Number Guide
5 x 7 Ceramic SM VCXO 6 Pads
MVI H
Frequency
Output
H = HCMOS
Supply Voltage
2 = +2.5 VDC
3 = +3.3 VDC
5 = +5.0 VDC
Frequency
Stability
010 = ±10 ppm
025 = ±25 ppm
050 = ±50 ppm
100 = ±100 ppm
Operating
Temperature
Blank = 0°C to +70°C
27 = -20°C to +70°C
48 = -40°C to +85°C
Pullability
D = ±50 ppm min
P = ±80 ppm min
C = ±100 ppm min
Linearity
Blank = ±20% max
X = ±5% max
Y = ±10% max
Z = ±15% max
Please Consult with MMD Sales Deparment for any other Parameters or Options
Pin 2 & 5 Connection
Blank = Pins 2 & 5 = N/C
H = Pin 2-Tri-state, Pin 5-N/C
R = Pin 2-N/C, Pin 5-Tri-state
T = Pins 2 & 5 = Tri-state
Packaging
Blank = Bulk
T = Tape and Reel
Mechanical Details
Tape & Reel Dimensions
4.00
2.00
PITCH
1.75
7.50
Tape Width
B0
REEL DIA
A0
K0
Q1 Q2
Q3 Q4
Q1 Q2
Q3 Q4
DIRECTION OF FEED
AO
BO
K0
PITCH
TAPE WIDTH
REEL DIA
QTY PER REEL
PIN 1 ORIENT.
1.85 [.073]
2.25 [.089]
0.95 [.037]
4.00 [.157]
12.00 [.471]
180 [7.0]
500
Q1
NOTES: UNLESS OTHERWISE SPECIFIED
1. Applicable Standards / Specifications
ANSI Y14.5M, Dimensions and Tolerances
EIA-481-B, 8 mm through 200mm Embossed Carrier Taping and 8 mm and 12 mm
Punched Carrier Taping of Surface Mount Components for Automatic Handling.
2. Dimensions are in millimeters [inch].
3. Tolerances are ±0.1 [.004] mm unless otherwise specified.
4. Do not scale drawing.
MMD MONITOR/QUARTZEK – An ILSI Company,
5458 Louie Lane, Reno, NV 89511
Phone: [phone], www.mmdcomp.com
Revisions only with customer approval
Revision:
07/31/13 P
Pg 2 of 2