H_13 Datasheet, PDF (2/2 Pages) MMD Components – H Series Crystal

Frequency Range
8.000MHZ to 10.999MHZ
11.000MHZ to 11.999MHZ
12.000MHZ to 15.999MHZ
16.000MHZ to 39.999MHZ
40.000MHZ to100.000MHZ
ESR Chart
ESR (Ohms)
100 max
80 max
60 max
40 max
70 max
Part Number Guide
Mode / Cut
Fund / AT
Fund / AT
Fund / AT
Fund / AT
3^rd OT/ AT
H
6m m X 3.5m m x 1.2m m
4 Pads
Frequency
Load Capacitance
S = Series
20 = 20pF (Standard)
XX = XXpF (8pF to 50pF)
Tem perature
Tolerance/Stability*
A = ±50 ppm / ±100 ppm
B = ±30 ppm / ±50 ppm
C = ±15 ppm / ±30 ppm
D = ±10 ppm / ±15 ppm
E = ±50 ppm / ±50 ppm
N = ±10 ppm / ±10 ppm
M ode of Operation
1 = Fundamental
3 = 3rd Overtone
Operating Tem perature
A = 0°C to +70°C
B = -20°C to +70°C
C = -40°C to +85°C **
Value Added Options
Blank = No Added Options
T = Tape and Reel
* Please consult with M MD sales departm ent for any other param eters or options.
** Not all Frequency Tolerance/Stability options available at this tem perature range.
Mechanical Details
Q1 Q2
Q3 Q4
Q1 Q2
Q3 Q4
DIRECTION OF FEED
Tape & Reel
PITCH
TAPE WIDTH
REEL DIA
NOTES: UNLESS OTHERWISE SPECIFIED
1. Applicable Standards / Specifications
ANSI Y14.5M, Dimensions and Tolerances
EIA-481-B, 8 mm through 200mm Embossed Carrier Taping and 8 mm and 12 mm
Punched Carrier Taping of Surface Mount Components for Automatic Handling.
2. Dimensions are in millimeters.
3. Tolerances are ±0.10 [.004] mm unless otherwise specified.
4. Do not scale drawing.
PITCH
TAPE WIDTH
REEL DIA
QTY PER REEL
PIN 1 ORIENT.
8.00 [.315]
16.00 [.630]
180[7 IN]
1000
Q1
MMD MONITOR/QUARTZEK – An ILSI Company,
5458 Louie Lane, Reno, NV 89511
Phone: [phone], www.mmdcomp.com
Specifications are subject to change without notice.
Revision:
07/10/13 J
Pg 2