DF_12 Datasheet, PDF (2/4 Pages) MMD Components – D & F Series Crystal

ESR Chart
Frequency Range
3.200MHz to 3.999MHz
4.000MHz to 4.999MHz
5.000MHz to 5.999MHz
6.000MHz to 7.999MHz
8.000MHz to 9.999MHz
10.000MHz to 11.999MHz
12.000MHz to 14.999MHz
15.000MHz to 19.999MHz
20.000MHz to 33.000MHz
24.576MHz to 29.999MHz
30.000MHz to 80.000MHz
ESR (Ohms)
150 Max
120 Max
100 Max
90 Max
70 Max
50 Max
50 Max
40 Max
30 Max
100 Max
80 Max
Part Number Guide
Mode / Cut
Fund / AT
Fund / AT
Fund / AT
Fund / AT
Fund / AT
Fund / AT
Fund / AT
Fund / AT
Fund / AT
3^rd OT / AT
3^rd OT / AT
D = HC-49/US SMD (4.5mm*)
F = HC-49/US SMD (3.5mm*)
*Max Height
Frequency
RoHS Compliant
Blank = Not Compliant
F = Is Compliant
Load Capacitance
S = Series
20 = 20pF (Standard)
XX = XXpF (8pF to 50pF)
Temperature
Tolerance/Stability**
A = ±50 ppm / ±100 ppm
B = ±30 ppm / ± 50 ppm
C = ±15 ppm / ± 30 ppm
D = ±10 ppm / ± 15 ppm
E = ±50 ppm / ± 50 ppm
N = ±10 ppm / ± 10 ppm
Mode of Operation***
1 = Fundamental
3 = 3rd Overtone
Operating Temperature
A = 0°C to +70°C
B = -20°C to +70°C
C = -40°C to +85°C
I = -40°C to +105°C
Value Added Options
Blank = No Added Options
T = Tape and Reel
3 = 3rd Lead
* Please consult with MMD sales department for any other parameters or options.
** Not all Frequency Tolerance/Stability options available at this temperature range.
***Mode is dependant upon Frequency. See ESR Chart
MMD Monitor/Quartztek
30400 Esperanza, Rancho Santa Margarita, CA, 92688
Phone: [phone], Fax: [phone], www.mmdcomp.com
[e-mail]
Specifications are subject to change without notice.
Revision:
10/20/10 P
Pg 2 of 4