English
Language : 

MVUH2 Datasheet, PDF (1/2 Pages) MMD Components – HCMOS Output
MVUH Series – 5 x 3.2 VCXO Specification
ELECTRICAL SPECIFICATION:
¾ 5 X 3.2 SMT Package – 6 Pins
¾ HCMOS Output
¾ Tri-State Option
¾ Tape and Reel Packaging Available
Frequency Range
Temperature Stability
Absolute Pull Range (APR) Inclusive of all conditions:
Calibration at +25ºC, Frequency Stability over the operating
temperature range, supply voltage change, output load
change, shock, and vibration
Aging at +25ºC
Operating Temperature Range
Storage Temperature Range
Supply Voltage (Vdd) ±5%
Supply Current
Output
Logic “1”
Logic “0”
Symmetry (50% of waveform)
Load
Rise/Fall Time (20% to 80%)
RMS Phase Jitter (12kHZ to 20MHZ)
Phase Noise
Start-up Time
Tri-state Operation
Control Voltage
Control Voltage Range
Slope
1.544MHZ to 77.760MHZ
(See Part Number Guide for Options)
(See Part Number Guide for Options)
±2 ppm / 1st year typ
(See Part Number Guide for Options)
-55°C to +125°C
+2.50 VDC
+3.30 VDC
15mA max
15mA max
HCMOS
90% of Vdd min
10% of Vdd max
(See Part Number Guide for Options)
15pF max
5 nSec max
1pSec max
100 Hz
1 kHz
10 kHz
100 kHz
-95 dBc/Hz
-125 dBc/Hz
-142 dBc/Hz
-152 dBc/Hz
10mSec max
Voh = 70% of Vdd min or No Connection to Enable Output
Vol = 30% max or grounded to Disable Output (High Impedance)
+0.30 VDC to 2.30 VDC
+0.30 VDC to 3.30 VDC
0.00 VDC to Vdd
Positive
PART NUMBER GUIDE:
5 x 3.2 Ceramic SMD 6 Pads
MVU H
Frequency
Output
H = HCMOS
Supply Voltage
2 = +2.50 VDC
3 = +3.30 VDC
Frequency
Stability
020 = ±20 ppm
025 = ±25 ppm
050 = ±50 ppm
100 = ±100 ppm
Operating
Temperature
Blank = 0°C to +70°C
27 = -20°C to +70°C
48 = -40°C to +85°C
Symmetry
Blank = 40%/60%
A = 45%/55%
Absolute Pull Range (APR)
D = ±50 ppm min
P = ±80 ppm min: less than 51.814MHZ
C = ±100 ppm min: less than 36.000MHZ
Linearity
Blank = ±20% max
Y = ±10% max
Please Consult with MMD Sales Department for any other Parameters or Options
Pin 2 & 5 Connection
Blank = Pins 2 & 5 = N/C
H = Pin 2-Tri-state, Pin 5-N/C
R = Pin 2-N/C, Pin 5-Tri-state
T = Pins 2 & 5 = Tri-state
Packaging
Blank = Bulk
T = Tape and Reel
MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688
Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com
Sales@mmdcomp.com
In the event of conflict, the requirements of this specification shall govern
Specification Subject to change without notice
Revision:
Pb RoHS
Free Compliant
MVUH111809B
Page 1 of 2