MVIP Datasheet, PDF (1/1 Pages) MMD Components – MIL-STD-883 Level B Screening Available

MVIP, MVIL, and MVIV Series
¾ MIL-STD-883 Level B Screening Available
¾ Available to -55°C to + 125°C Operating
¾ RoHS Compliant
¾ Less than 1 pSec Jitter
ELECTRICAL SPECIFICATIONS:
Frequency Range
Frequency Stability*
Operating Temp.Range
Storage Temp. Range
Aging
Logic “0”
Logic “1”
Supply Voltage (Vdd)
Supply Current
Symmetry (50% of waveform)
Rise / Fall Time (20% to 80%)
Load
Start Time
Phase Jitter (12kHz to 20MHz)
+2.5VDC ± 5%
+3.3VDC ± 5%
+5.0VDC ± 5%
Tri-State Operation
* Inclusive of Temp., Load, Voltage and Aging
LVDS
LVPECL
PECL
70.000MHz to 800.000MHZ
(See Part Number Guide for Options)
(See Part Number Guide for Options)
-55°C to +125°C
±5 ppm / yr max
1.43V typ
Vdd – 1.620 VDC max
Vdd – 1.620 VDC max
1.10V typ
Vdd- 1.025 vdc min
Vdd- 1.025 vdc min
50 mA max
50 mA max
N/A
60 mA max
60 mA max
N/A
N/A
N/A
140 mA max
(See Part Number Guide for Options)
2nSec max
50 Ohms into Vdd-2.00 VDC
10mSec max
Less than 1 pSec
Vih = 70% of Vdd min to Enable Output
Vil = 30% max or grounded to Disable Output (High Impedance)
Control Voltage (Vc)
Pullability
Linearity
+2.5VDC
+3.3VDC
+5.0VDC
1.25VDC ±1.00VDC
1.65VDC ±1.50VDC
N/A
1.25VDC ±1.00VDC
1.65VDC ±1.50VDC
N/A
(See Part Number Guide for Options)
(See Part Number Guide for Options)
N/A
N/A
2.50VDC ±2.00VDC
MECHANICAL DIMENSIONS:
7.20 [.283]
MAX
2.00 [.079]
MAX
2.54 [.100]
2.54 [.100]
2.54 [.100]
2.54 [.100]
5.20 [.205]
MAX
1.30 [.051]
DIMENSIONS IN BRACKETS ARE IN INCHES
EXTERNAL BYPASS CAPACITOR RECOMMENDED
456
2.40 [.094]
321
1.40 [.055]
2.00 [.079]
4.20 [.165]
1.80 [.071]
PIN CONNECTIONS
PIN 1 VOLTAGE CONTROL
PIN 2 ENABLE/DISABLE
PIN 3 GROUND
PIN 4 OUTPUT
PIN 5 COMPLIMENTARY OUTPUT
PIN 6 SUPPLY VOLTAGE
RECOMMENDED
LAND PATTERN
PART NUMBER GUIDE:
MVI
Frequency
Output
P = PECL
L = LVPECL
V = LVDS
Supply Voltage
2 = +2.5 VDC
3 = +3.3 VDC
5 = +5.0 VDC
Frequency
Stability
020 = ±20 ppm
025 = ±25 ppm
050 = ±50 ppm
100 = ±100 ppm
Operating
Temperature
Blank = 0°C to +70°C
27 = -20°C to +70°C
48 = -40°C to +85°C
55 = -55°C to +125°C
Symmetry *
Blank = 40%/60%
A = 45%/55%
B = 47.5%/52.5%
Pullability
A = ±200 ppm min
C = ±100 ppm min
D = ±50 ppm min
P = ±25 ppm min
*Option B (47.5/52.5%) Available up to 500MHZ only
Please Consult with MMD Sales Deparment for any other Parameters or Options
Linearity
Blank = ±20% max
X = ±5% max
Y = ±10% max
Z = ±15% max
MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688
Phone: [phone], Fax: [phone], www.mmdcomp.com
[e-mail]
Specifications subject to change without notice
Revision MVIP032907B