MUL_12 Datasheet, PDF (1/2 Pages) MMD Components – MUL Series 5X3.2 Ceramic SMD Oscillator

MUL Series 5X3.2 Ceramic SMD Oscillator
Frequency Range
Temperature Stability (Inclusive of
Temperature, Load, Voltage, and Aging)
Operating Temperature Range
Storage Temperature Range
Supply Voltage (V_DD) ±5%
Supply Current
Output
Logic “0”
Logic “1”
Load
Symmetry (50% of waveform)
Rise/Fall Time (20% to 80%)
RMS Phase Jitter (12kHZ to 20MHZ)
Phase Noise
Start-up Time
Tri-state Operation
 5 x 3.2 SMD Package 6 Pin
 LVPECL Output
 Tristate Option
 Tape & Reel Packaging Available
74.250MHZ to 161.1328MHZ
(See Part Number Guide for Options)
(See Part Number Guide for Options)
-55°C to +125°C
(See Part Number Guide for Options)
75mA max
LVPECL
1.43 VDC typ, 1.60 VDC max
1.10 VDC typ, 0.90 VDC min
50Ω into V_dd-2.0VDC
(See Part Number Guide for Options)
300p Sec typ, 700pSec max
1pSec max
100 Hz = -95 dBc/Hz
1 kHz = -125 dBc/Hz
10 kHz = -143 dBc/Hz
100 kHz = -146 dBc/Hz
10mSec max
Voh = 70% of Vdd min or No Connection to Enable Output
Vol = 30% max or grounded to Disable Output (High Impedance)
Mechanical & Environmental Detail
Marking Detail
Shock
Solderability
Vibration
Gross Leak Test
Fine Leak Test
Reflow Solder
MIL-STD-883, Method 2002 Cond B
MIL-STD-883, Method 2003
MIL-STD-883, Method 2007, Cond A
MIL-STD-883, Method 1014, Cond C
MIL-STD-883, Method 1014, Cond A2
+260°C for 10 sec max
Line 1 = MXXXXX
M = MMD
XXXXX = Frequency in MHZ
Line 2 = SYYWWL
S = Internal Code
YYWW
=
4 Digit Date Code (Year /
Week)
L = Denotes RoHS Compliant
Line 3 = XXXXX
Internal use only
May vary with lots
Black dot to denote Pin 1
MMD Monitor/Quartztek
30400 Esperanza, Rancho Santa Margarita, CA, 92688
Phone: [phone], Fax: [phone], www.mmdcomp.com
[e-mail]
Subject to change without notice
Revision:
08/17/11 B
Pg 1 of 2