MUL3 Datasheet, PDF (1/2 Pages) MMD Components – Ceramic SMD Oscillator

MUL Series 5X3.2 Ceramic SMD Oscillator
Frequency Range
Temperature Stability (Inclusive of
Temperature, Load, Voltage, and Aging)
Operating Temperature Range
Storage Temperature Range
Supply Voltage (V_dd) ±5%
Supply Current
Output
Logic “0”
Logic “1”
Load
Symmetry (50% of waveform)
Rise/Fall Time (20% to 80%)
RMS Phase Jitter (12kHZ to 20MHZ)
Phase Noise
Start-up Time
Tri-state Operation
 5 x 3.2 SMD Package 6 Pin
 LVPECL Output
 Tristate Option
 Tape & Reel Packaging Available
74.250MHZ to 161.1328MHZ
(See Part Number Guide for Options)
(See Part Number Guide for Options)
-55°C to +125°C
(See Part Number Guide for Options)
75mA max
LVPECL
V_dd - 1.60V max., (nom., Load)
V_dd - 1.03V min., (nom., Load)
50Ω into V_dd-2.0VDC
(See Part Number Guide for Options)
300p Sec typ, 700pSec max
1pSec max
100 Hz = -95 dBc/Hz
1 kHz = -125 dBc/Hz
10 kHz = -143 dBc/Hz
100 kHz = -146 dBc/Hz
10mSec max
Voh = 70% of Vdd min or No Connection to Enable Output
Vol = 30% max or grounded to Disable Output (High Impedance)
Mechanical & Environmental Detail
Marking Detail
Shock
Solderability
Vibration
Gross Leak Test
Fine Leak Test
Reflow Solder
MIL-STD-883, Method 2002 Cond B
MIL-STD-883, Method 2003
MIL-STD-883, Method 2007, Cond A
MIL-STD-883, Method 1014, Cond C
MIL-STD-883, Method 1014, Cond A2
+260°C for 10 sec max
Line 1 = MXXXXX
M = MMD
XXXXX = Frequency in MHZ
Line 2 = SYYWWL
S = Internal Code
YYWW
=
4 Digit Date Code (Year /
Week)
L = Denotes RoHS Compliant
Line 3 = XXXXX
Internal use only
May vary with lots
Black dot to denote Pin 1
MMD Monitor/Quartztek
30400 Esperanza, Rancho Santa Margarita, CA, 92688
Phone: [phone], Fax: [phone], www.mmdcomp.com
[e-mail]
Subject to change without notice
Revision:
04/10/16 D
Pg 1 of 2