MTTBS Datasheet, PDF (1/2 Pages) MMD Components – 5 x 3.2 Ceramic SMD VCTCXO

MTTBS Series – 5 x 3.2 Ceramic SMD VCTCXO
¾ Low Profile SMD Device
¾ Hermetically Sealed
¾ Tight Stability Over Temperature
¾ Low Power Consumption
ELECTRICAL SPECIFICATIONS:
Frequency Range
Frequency Stability vs Temperature*
Operating Temperature Range
Storage Temperature Range
Supply Voltage (±10%)
Supply Current
Output Type
Output Level
Load
Harmonics
Control Voltage
Frequency Tunning Range
Phase Noise
Start-up Time
* Inclusive of Temperature., Load, Voltage and Aging
10.000MHZ to 32.000MHZ
(See Frequency Stability vs Temperature Table)
(See Frequency Stability vs Temperature Table)
-40°C to +85°C
+2.80VDC
+3.00VDC
1.5mA max
Clipped Sinewave
0.9 – 1.4 Vp-p
10k Ohms // 10pF
-10dBc max
Vc = +1.40VDC
Vc = +1.5VDC
+0.40VDC to +2.40VDC
+0.50VDC to +2.50VDC
±3 ppm to ±25 ppm
-135dBc/Hz max (at 1kHz offset)
2ms max (Output level will be 90% from the final value)
PART NUMBER GUIDE:
5 x 3.2 Ceramic SMD
MTTB S
Frequency
Output
S = Clipped Sinewave
Supply Voltage
2 = +2.8 VDC
3 = +3.0 VDC
Frequency
Stability
15 = ±1.5 ppm
20 = ±2.0 ppm
25 = ±2.5 ppm
30 = ±3.0 ppm
50 = ±5.0 ppm
Operating
Temperature
A = 0°C to + 50°C
C = -20°C to +70°C
D = -30°C to +70°C
E = -30°C to +80°C
F = -40°C to +85°C
G = 0°C to +70°C
Pin 1 Connection
Blank = No Connection
G = Ground
V = Voltage Control
Please Consult with MMD Sales Department for any other Parameters or Options
Packaging
Blank = Bulk
T = Tape and Reel
MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688
Phone: [phone], Fax: [phone], www.mmdcomp.com
[e-mail]
Specifications subject to change without notice
Revision 02/14/07 C