MTJH5 Datasheet, PDF (1/2 Pages) MMD Components – Voltage Control Option

MTJH, MTJS, & MTJZ SERIES TCXO
Output
Frequency Range
Load
Supply Current
Output Level
Symmetry
Freq. Stability vs Temp (Note 1)
Freq. Stability vs Aging
Freq. Stability vs Voltage
Freq. Stability vs Load
Operating Range
Storage Temperature
Supply Voltage (Vdd)
Control Voltage with VC option
Pin 1 Connection
No Connection
VC Option
 11.7 X 9.6 SMD Package
 Voltage Control Option
 Wide Frequency Range
 RoHS Compliant Available
HCMOS
Clipped Sinewave
Sinewave
9.600MHZ to 50.000MHZ
10k Ohms // 15pF
10k Ohms // 15pF
50 Ohms
35mA max
3mA max
25mA max
Logic “1” = 90% of Vdd min
Logic “0” = 10% of Vdd max
1.0V p-p min
7 dBm
See Part Numbering Guide
N/A
N/A
(See Frequency Stability vs Temperature Table)
±1 ppm per year max
±0.3 ppm with a 5% change in Vdd
±0.3 ppm with a 10% change in Load
(See Frequency Stability vs Temperature Table)
-40°C to +85°C
+3.3VDC ±5%
+5.0VDC ±5%
+1.65VDC ±1.50VDC Positive Slope
+2.50VDC ±2.00VDC Positive Slope
No Connection
±10 ppm min
Note 1: Oscillator frequency shall be ±1 ppm at +25°C ±3°C at time of shipment.
Phase Noise
Marking Detail
Line 1 = MXXXXX
M
XXXXX
Line 2 = SYYWWL
S
YYWW
= MMD
= Frequency in MHZ
= Internal Code
= _{4 Digit Date Code}
(Year / Week)
L
= Denotes RoHS Compli-
ant
Line 3 = XXXXX
Internal use only
May vary with lots
Black dot to denote Pin 1
Envir & Mech Detail
Shock
MIL-STD-883,
Method 2002,
Condition B
Solderability
MIL-STD-883,
Method 2003
Vibration
MIL-STD-883,
Method 2007,
Condition A
MMD Monitor/Quartztek
30400 Esperanza, Rancho Santa Margarita, CA, 92688
Phone: [phone], Fax: [phone], www.mmdcomp.com
[e-mail]
Revisions only with customer approval
Revision:
MTCH011311L
Pg 1 of 2