MTBH Datasheet, PDF (1/2 Pages) MMD Components – Industry Standard Package

MTBH, MTBS, and MTBZ Series
¾ Industry Standard Package
¾ +3.30VDC or +5.00VDC
¾ RoHS Compliant Available
¾ Up to 800.000MHZ
ELECTRICAL SPECIFICATIONS:
Output
Frequency
Range
Load
Supply Current
Output Level
Fund or 3^rd OT
PLL
Symmetry
Freq. Stability vs Temp (Note 1)
Freq. Stability vs Aging
Freq. Stability vs Voltage
Freq. Stability vs Load
Storage Temperature
Supply Voltage (Vdd)
Control Voltage with VC option
Pin 1 Connection
No Connection
VC Option
Mechanical Trimmer when
Specified
HCMOS
Clipped Sinewave
Sinewave
1.000KHZ to 180.000MHZ
1.000KHZ to 180.000MHZ
1.000KHZ to 180.000MHZ
75.000KHZ to 200.000MHZ 75.000KHZ to 800.000MHZ 75.000KHZ to 800.000MHZ
10k Ohms // 15pF
10k Ohms // 15pF
50 Ohms
35mA max
3mA max
35mA max
Logic “1” = 90% of Vdd min
Logic “0” = 10% of Vdd max
1.0V p-p min
0 dBm min
40%/60% at 50% of
Waveform
N/A
N/A
(See Frequency Stability vs Temperature Table)
±1 ppm per year max
±0.3 ppm with a 5% change in Vdd
±0.3 ppm with a 10% change in Load
-40°C to +85°C
+3.3VDC ±5%
+5.0VDC ±5%
+1.65VDC ±1.50VDC Positive Slope
+2.50VDC ±2.00VDC Positive Slope
No Connection
±10 ppm min
±3 ppm min
If no mechanical trimmer is specified, trimmer may still be present depending on frequency
stability option.
Note 1: If no mechanical trimmer, oscillator frequency shall be ±1 ppm at +25°C ±3°C at time of shipment.
PART NUMBER GUIDE:
MT B
FREQUENCY
14 PIN DIP TCXO
Series Options
B = B Series (5.0 mm ht)
Output
H = HCMOS
S = Clipped Sinewave
Z = Sinewave
Supply Voltage
5 = +5.0VDC
3 = +3.3VDC
RoHS Compliant
Blank = Not Compliant
F = is Compliant
Frequency
Stability
10 = ±1.0 ppm
15 = ±1.5 ppm
20 = ±2.0 ppm
25 = ±2.5 ppm
30 = ±3.0 ppm
50 = ±5.0 ppm
Operating
Temperature
A = 0°C to +50°C
C = -20°C to +70°C
D = -30°C to +70°C
E = -30°C to +80°C
F = -40°C to +85°C
G = 0°C to +70°C
Please Consult with MMD Sales Department for any other Parameters or Options.
Value Added Options
Blank = No Added Options
G = Gull-wing
Trimmer Option
Blank = No Trimmer
M = Mechanical Trimmer
Pin 1 Connection
Blank = N/C
V = Voltage Control
MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688
Phone: [phone], Fax: [phone], www.mmdcomp.com
[e-mail]
Specifications subject to change without notice
Revision MTBH121807H