MQIC_12 Datasheet, PDF (1/2 Pages) MMD Components – MQIC & MQIT Series 5X7 Ceramic SMD Oscillator

MQIC & MQIT Series 5X7 Ceramic SMD Oscillator
 Same day Shipping Available
 5x7mm SMD Package
 RoHS Compliant
 Tape & Reel package Available
Frequency
Frequency Stability (Inclusive of Temperature, Load & Volt-
age)
Aging @ +25°C
Operating Temperature Range
Storage Temperature Range
Output Waveform
Supply Voltage (Vdd)
Supply Current (unloaded)
Load
Logic “0”
Logic “1”
Rise/Fall Time
Start Up Time
Duty Cycle
1.000MHZ to 66.000MHZ
66.000MHZ and above
Jitter
1.000MHZ to 33.000MHZ
33.000MHZ and above
Tristate Operation
1.000MHZ to 150.000MHZ
See Part Number Guide
±5 ppm per year max
See Part Number Guide
-55°C to +125°C
TTL
CMOS
+3.3 VDC ±10% +5.0 VDC ±10% +3.3 VDC ±10% +5.0 VDC ±10%
25mA
45mA
25mA
45mA
5 TTL or 30pF
10 TTL or 50pF
15pF
30pF
0.4 V max
0.3 V max
0.5 V max
2.4 V min
3.0 V min
4.5 V min
4nSec max
10mSec max
45%/55% (TTL @ 1.4V Level / CMOS @ 50% Waveform)
40%/60% (TTL @ 1.4V Level / CMOS @ 50% Waveform)
5pSec max (RMS)
10pSec max (RMS)
Voh = 70% of Vdd min or No Connection to Enable Output
Vol = 30% of Vdd max or grounded to Disable Output (High Impedance)
Mechanical & Environmental Detail
Marking Detail
Shock
Solderability
Solvent Resistance
Vibration
Gross Leak Test
Fine Leak Test
MSL
MIL-STD-883, Method 2002 Cond B
MIL-STD-883, Method 2003
MIL-STD-202, Method 215
MIL-STD-883, Method 2007, Cond A
MIL-STD-883, Method 1014, Cond C
MIL-STD-883, Method 1014, Cond A2
Level 1 per IPC/JEDEC J-STD 20
Line 1 = MXXXXX
M ⁼ MMD
XXXXX ⁼ Frequency in MHZ
Line 2 = SYYWWL
S=
YYWW ⁼
L=
Internal Code
4 Digit Date Code (Year /
Week)
Denotes RoHS Compliant
Line 3 = XXXXX
Internal use only
May vary with lots
Black dot to denote Pin 1
MMD Monitor/Quartztek
30400 Esperanza, Rancho Santa Margarita, CA, 92688
Phone: [phone], Fax: [phone], www.mmdcomp.com
[e-mail]
Subject to change without notice
Revision:
04/29/11
Pg 1of 2